Free Shipping on all 92X Performance Defensive Models by LTT!
Introduced in 2020, the 92X Performance with LTT Trigger Job has been one of our most demanded products yet. In 2023, Beretta replaced the 92X Performance with the new 92X Performance Defensive, which removes the accessory rail, but adds the Beretta RDO cut to the slide.
Just like the original Performance, LTT took the features of the 92X Performance Defensive and cranked everything up to 11 with the LTT Trigger Job, which lightens and smooths both the DA/SA pulls, and significantly reduces overtravel and single action reset. If you thought the stock trigger on the 92X Performance was nice.... wait until you get your hands on the 92X Performance with our Trigger Job and Optimized Performance Trigger Bar.
Finally, we cap off the Defensive with our patented LOW RDO cut, the lowest & most secure optic mounting solution available for Beretta 92s of any kind.
Note: LTT RDO plates are NOT compatible with the Beretta RDO system, your slide MUST be cut for the LTT RDO solution.
Already have a legacy 92X Performance or a base model 92X Performance Defensive? Send it in for an LTT RDO Cut or Trigger Job!
Approximate Trigger Pull Weight:
- DA: 5.6 to 6.4lbs
- SA: Sub 3lbs
BASE MODEL FEATURES CAN BE FOUND HERE: 92X Performance Defensive
LTT UPGRADE FEATURES:
- LTT Trigger Job
- Optimized performance Trigger Bar
- Patented LTT RDO Cut
- (2) 15 RD Magazines
If the option set you want is not in stock, please add your email to the notification list and we'll let you know as soon as it's available!
WHAT MAKES THE LOW RDO FROM LTT DIFFERENT?
Langdon Tactical’s Low RDO is a game changer when it comes to mounting a red dot on your 92/M9/96 Series gun as low as possible.
Introduced in 2020, LTT’s 92 RDO solution quickly set the standard in pistol optics. Our patented solution includes a full redesign of the internal components of the 92/96 series pistol in order to properly low-mount the optic. With a dot height of just .85 above the centerline of the bore (with a Trijicon RMR), it is one of the lowest mounting systems for any pistol and THE lowest for the 92 series of pistols. This allows the shooter a natural point of aim, a more secure mounted plate and optic, and a lighter operating system for the gun as it cycles. LTT’s proprietary plate sits farther back on the slide when compared to other 92 RDO solutions on the market, allowing for optics like the Trijicon SRO and RMR HD to NOT hang over the breach face and interfere with the ejection pattern of brass. Further, the lower, lighter plate is more secure with three mounting screws and proper thread engagement.
The LTT Beretta 92 LOW RDO Solution is patented in the US as of May 2023.
For more information on RDO Mounting Footprints, please click this link: Optics Info
WHAT IS THE LTT REAR SIGHT FORWARD (RSF) OPTIC PLATE?
LTT is proud to offer a limited selection of our optics footprints in a rear sight forward (RSF) configuration. Having the rear sight in front of the optic window decreases visual clutter, making it easier to remain focused on the target during the shooting process. Placing the rear sight forward of the optic also means that you can see the dot in 100% of the window, because none of your view of the optic is obstructed by the rear sight. Finally, the RSF configuration can help keep the front lens of your optic clean by deflecting some of the carbon, gas, and debris that exits the chamber away from the lens.
Looking for replacement screws? You can find them here.
NOTE: These plates will not fit on the Beretta M9A4 or 92X RDO solutions AS IT COMES from Beretta. These will only work with LTT’s proprietary RDO solution.
Sorry, We Cannot Accept ANY Returns on RDO Plates.
For more information on RDO Mounting Footprints, please click this link: Optics Info
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
ALL FIREARM SALES ARE FINAL
As of October 1st 2022, ALL Firearm purchases are FINAL. LTT Cannot accept any changes or cancellations to firearm orders.
LTT proudly stands behind all workmanship and custom work performed in our shop - please contact us for any repair or service concerns.
FIREARM PARTS DISCLAIMER:
We recommend that any and all firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith.
No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product.
Installation of any firearm parts may limit or void the manufacturers warranty.
We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Returns performed due to no fault of LTT (repair or replacement) a restocking fee of 20% will be applied.
NON-FIREARM ORDER CANCELLATION POLICY:
Firearm Orders cannot be canceled - please see above and here: Firearm Purchase Policy
For NON-FIREARM Orders, cancellations will be processed for orders that have not already shipped, if cancellation is requested in writing within 48 hours of order placement. Orders that have already shipped are not eligible for cancellation.
CALIFORNIA (AND OTHER REGULATED STATES) WARNING:
We CANNOT ship magazines with a capacity over 10 rounds to CA or other regulated states at this time; This includes all of the following, however may not be limited to: CA, CO, CT, IL, MA, MD, NJ, NY, VT, WA, & Washington D.C.
If you purchase magazines with a capacity greater than is allowed by your state and/or local regulations, your order will be canceled and you will NOT be refunded.
Effective: February 1st, 2023
There are a few important things to keep in mind if you are making a return or exchange with Langdon Tactical Technology, Inc. (LTT) for NON-FIREARM orders:
-
- You have 14 calendar days from the date you receive your order to request a return for any item purchased from LTT.
- Only items that have been purchased directly from LTT, either online or through an authorized dealer, can be returned to LTT.
- We do not accept returns on transferred firearms. If there is an issue with your firearm, please contact sales@langdontactical.com.
- We do not accept returns on any firearms parts or gear that have been opened, installed or used - If you believe the part to be defective, please contact sales@langdontactical.com to see if it is eligible for return.
- PURCHASES MADE USING SEZZLE: For approved returns on purchases made using Sezzle, please be aware that your refund amount will be processed and returned to you by Sezzle. LTT will initiate the return as soon as it is approved, however all financial dealing will be handled directly with Sezzle. Please see Sezzle's Returns guide for more information: https://shopper-help.sezzle.com/hc/en-us/articles/360046890251-How-do-refunds-work-
- Mistakes: We make every effort to provide clear, concise, and correct product descriptions and information for every product we sell, however as we offer hundreds of unique products, custom options, and custom combinations of products, mistakes do occur from time to time.
If you believe there is or may be a bonafide mistake in a product description, please contact our customer service team PRIOR to placing your order, to confirm the information presented.
Langdon Tactical will not issue a refund or exchange or honor incorrect pricing based upon bonafide mistakes that may appear on our site without our knowledge.
Trigger Job 2-5 business days, Trigger Job w/ RDO Cut 2-4 weeks