The 92 Elite LTT with a low mount Red Dot Optic Cut Slide (Full Size, Centurion, or Compact)
After years of development, Langdon Tactical is very proud and excited to introduce a Micro Red Dot capable Beretta 92. This has been no easy task as the internal workings of the 92 slide have made the "proper" low mounting of a red dot optic impossible. With the design of 5 new components and a custom mounting plate specific for the Beretta 92, Langdon Tactical can properly low mount a micro red dot optic.
When we say low, we mean very low: Our system has a dot height above the center of the bore of .85" (when paired with a Trijicon RMR), which is as low or lower than most direct milled striker-fired systems.
A re-engineered firing pin and firing pin block permits the super-secure mounting of an adapter plate that is held in place with three mounting screws, a front dovetail, and a center indexing boss milled into the slide. This plate has a built-in back-up rear sight that mates up with a newly designed front sight for the Elite LTT and other Vertec type slides. This new system is a game-changer for the Beretta 92 owners. The LTT RDO Solution for the Beretta 92 Series of pistols is currently Patent Pending.
All RDO pistols come with a red dot height front sight, our proprietary adapter plate with built in rear sight installed, an optimized performance trigger bar, a 13# hammer spring, and the LTT Trigger Job.
All RDO guns are 'G-model'/decock only. The 92 Elite LTT ships with (3) 18 rd magazines. The Carry Bevel Model includes the NP3 parts and trigger job.
**An RDO/Optic sight is NOT INCLUDED in this package** The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds.
California: these firearms are not on the CA roster.
LEAD TIMES: Please Note - if you can add to cart and checkout, we have a gun for you! If it is out of stock, please sign up for the wishlist!
-
Full Size 92 Elite LTT with RDO &
- Trigger Job: 3-4 weeks
- NP3: 4-6 Weeks
- Carry Bevel: 6-8 Weeks
-
Compact 92 Elite LTT with RDO &
- Trigger Job: 3-4 weeks
- NP3: 4-6 Weeks
- Carry Bevel: 6-8 Weeks
-
Centurion 92 Elite LTT with RDO &
- Trigger Job: 3-4 weeks
- NP3: 4-6 Weeks
- Carry Bevel: 6-8 Weeks
FAQ's:
Q: What is the cowitness of the RDO BUIS?
A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.
Q: What red dot optics are supported by the LTT RDO solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- RMR to Plate Screws:
- For attaching a Holosun to the RDO Plate use: 4x40 – 5/16
- For attaching an RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our Doctor Plate fits:
- Docter/Noblex Sight C
- Docter/Noblex sight 2+
- Docter/Noblex sight III
- Docter/Noblex QUICKsight 5.0 VR
- Noblex Sight G
- Vortex Venom
- Burris Fastfire 2*
- Burris Fastfire 3*
- Delta Optical MiniDot*
- Delta Optical MiniDot II*
- Hawke Reflex 1×25*
- Sightmark Mini Shot Pro Spec*
- Sightmark Mini Shot M-Spec
- Leica Tempus
- MAKdot 1×25
- Vomz Pilad 1×20
- Doctor Optic to Plate Screws:
- Doctor to RDO Plate use: 4x40 - 3/8 or 4x40 - 5/16
Our Shield/Delta Plate fits (no rear sight):
- Leupold Delta Point Pro
- Sig Sauer Romeo 2
- Delta/Shield/Romeo Optic to Plate Screws:
- Delta/Romeo: Delta/Romeo to RDO Plate use: 4x40 - 1/2
Our HE509T Plate fits:
- Holosun HE509T
- HE509T Optic to Plate Screws:
- Holosun 509T: Holosun to the RDO Plate use: 4x40 – 5/16
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- Warning: This plate will not fit the 407/507K optics. While the manufacturer lists the footprint as the same, the mounting post has a different height on the EPS optic and a slight difference in the size of the optic body.
- EPS Optic to Plate Screws:
- EPS: EPS to RDO plate use: 4x40 - 5/16
Looking to upgrade your existing 92?
Grab a new Elite LTT RDO Slide or Upgrade your existing slide with our RDO Solution
CHECK OUT THE NEW LTT GEAR HERE, including RDO holster, hat and t-shirts!
See the videos page for videos from the range, shop, drop test and drop test after thoughts
Still have questions? Check our Frequently Asked Questions (FAQ) page for more information!
Please see our Firearms Purchase Policy prior to checking out - by purchasing a firearm from LTT you confirm that you have read and understand our Firearms Purchase Policy.
Videos Hide Videos Show Videos
-
LTT 92 Red Dot Optic - from the Shop with Ernest Langdon
It's here! A Red Dot Optic for the Beretta 92, exclusively fro...
-
RDO Drop Test After Thoughts with Ernest Langdon
Drop Test After Thoughts on the 92 Red Dot Optic with Ernest L...
-
LTT 92 Red Dot Optic - from the Range with Ernest Langdon!
It's here! A Red Dot Optic for the Beretta 92, exclusively fro...
-
92 LTT RDO Drop Test
Drop Test from Langdon Tactical with the 92 Elite LTT Slide wi...
36 Reviews Hide Reviews Reviews
-
92G Elite compact with RDO and carry bevel
Received the gun 8 weeks after order as promised. It shoots very well. I was hitting bulls eye at 30 yards easily. Only gripe I had was the coating around the trigger had 3 small chips in the coating when it arrived, it is not very noticeable but it still hurt me. I would recommend and buy it again though.
-
Damn near perfect
Man this thing is NICE! The cerakote refinish is durable and smooth, the mounting system is crazy secure with no movement after 1000 rounds, and the overall feel screams quality. After a few range days I had zero failures of any kind and had no accuracy issues whatsoever.
I only have two small gripes:
1) The frame finish was more of a bluish gray than black (this is a problem with the Beretta factory itself, not LTT. So you may want to consider getting the carry bevel which includes black cerakote for the frame.)
And 2) The co-witness sights are quite a bit taller than Iād like. I mounted a Trijicon RMR and the backup sights definitely add some clutter to the sight picture. If you have an SRO or Deltapoint Pro theyāll be great, but for an RMR I wish there was an option for shorter sights.
Putting those very first-world gun problems aside, this gun is otherwise perfect. You have to hold one in your hand to fully appreciate just how beautiful and finely tuned the LTT 92ās are. -
LTT elite compact rdo, trigger job,np3
I was a Glock guy for 35 years and I am just amazed at how better I shoot with this gun without even trying. It makes the Glock triggers a cruel joke.
The long smooth double pull is safer and way better. The reset and single pull is a game changer for me.
-
Centurion RDO Bevel
Absolutely worth both the wait and price. Smoooooothe trigger, incredible double action pull
-
92 Elite LTT RDO
This is absolutely the smoothest firing pistol I have ever shot. Iāve been and a fan of Berettas for a long time and have used them both recreationally and professionally. Langdon Tactical takes them to another level. The double action take-up is light and the break is clean. The trigger reset is extremely short and makes follow-up shots that much easier. A LTT 92 Elite should be in every serious pistol shooterās collection.
-
92 Elite
I received the pistol just a week after ordering, which was a surprise. The pistol is everything the reviews say it is so if you can afford it, buy it. I got the full size with trigger job, paired now with an RMR and TLR1. Fired just 200 rounds so far but everything works right and it is very accurate. When I have more confidence with the DA action it will be my edc.