92X Performance Defensive

Introduced in 2020, the 92X Performance with LTT Trigger Job has been one of our most demanded products yet. In 2023, Beretta replaced the 92X Performance with the new 92X Performance Defensive, which removes the accessory rail, but adds the Beretta RDO cut to the slide. 

Just like the original Performance, LTT took the features of the 92X Performance Defensive and cranked everything up to 11 with the LTT Trigger Job, which lightens and smooths both the DA/SA pulls, and significantly reduces overtravel and single action reset.
If you thought the stock trigger on the 92X Performance was nice.... wait until you get your hands on the 92X Performance with our Trigger Job and Optimized Performance Trigger Bar. 

Finally, we cap off the Defensive with our patented LOW RDO cut, the lowest & most secure optic mounting solution available for Beretta 92s of any kind.
Note: LTT RDO plates are NOT compatible with the Beretta RDO system, your slide MUST be cut for the LTT RDO solution. 

Already have a legacy 92X Performance or a base model 92X Performance Defensive? Send it in for an LTT RDO Cut or Trigger Job!

New Product images coming soon! The 92X Performance Defensive ships with two 17rd magazines.

Base Model Features can be found here: 92X Performance Defensive 

92X Performance Defensive Shipping Lead Times (when in stock):

• Trigger Job only: 5-10 Business Days
• Trigger Job & RDO: 4-6 Weeks

If the option set you want is not in stock, please add your email to the notification list and we'll let you know as soon as it's available!

Q: What red dot optics are supported by the LTT RDO solution?

Our RMR Plate fits:

• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
• Riton X3 Tactix PRD
• NcStar VISM FlipDot Pro
• Swampfox Kingslayer
• DOES NOT FIT RMRcc

• RMR to Plate Screws: 
• For attaching a Holosun to the RDO Plate use:  4x40 – 5/16
• For attaching an RMR or SRO to the RDO Plate use: 4x40 – 3/8

Our HE509T Plate fits:

• Holosun HE509T 

• HE509T Optic to Plate Screws:
• Holosun 509T: Holosun to the RDO Plate use: 4x40 – 5/16

Our Holosun EPS Plate fits:

• Holosun EPS
• Holosun EPS Carry
• Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight. 
• Warning: This plate will not fit the 407/507K optics. While the manufacturer lists the footprint as the same, the mounting post has a different height on the EPS optic and a slight difference in the size of the optic body. 

• EPS Optic to Plate Screws:
• EPS: EPS to RDO plate use: 4x40 - 5/16

Still have questions? Check our Frequently Asked Questions (FAQ) page for more information! We cannot do the NP3 or RDO cut to this firearm. 

Please see our Firearms Purchase Policy prior to checking out - by purchasing a firearm from LTT you confirm that you have read and understand our Firearms Purchase Policy.