** We have brought back the Beretta Elite 2 Hammer and the Beretta Match Hammer in our trigger jobs in a bag for a limited time while we await our next batch of LTT Optimized Performance Hammers to arrive**
After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the "Trigger Job in a Bag." We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA/SA. The Trigger Job in a Bag is about 80% of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a "Trigger Job," with this kit. In August 2025, LTT switched over to a newly designed optimized performance hammer to optimize total trigger job performance in every way with improved sear notch geometry, reduced pre-travel distance, faster lock time, and better firing pin indent with lighter hammer springs. We believe this kit set-up gives you the best Trigger Job Performance and stand behind this hammer design, which has been over a year in development and manufacturing.
PLEASE NOTE:
This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance, 92XI, or the 92GTS; these pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
- Trigger Bar
- Hammer
- Sear & Sear Spring
- Trigger Spring
- Hammer Strut
- Reduced Power Hammer Spring
To make a purchase, please select one option from each group:
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
- Black (factory)
- NP3 (nickel teflon/stainless color)
Hammer Option:
- 2025 LTT Optimized Performance Hammer
- 2025 LTT Optimized Performance Spurless Hammer
Trigger Bar:
Hammer Spring Weight:
With the following hammer springs, your DA/SA pull weight will be approximately
- 12# DA: 5.6 to 6.4lbs
- 13# DA: 6.3 to 7lbs
- 14# DA: 7 to 7.5lbs
- Single Action for all: 3.5 - 4lbs
LEAD TIMES:
Black: In stock - Shipping in 1-2 weeks
NP3: In Stock- Shipping in 1-2 weeks
Common Customer Confusion:
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80% of what we can do if we have the gun itself.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
