trigger job in a bag
Absolutely amazing improvement in both SA and DA. Installation was straight forward using the langdon video. Great product.
After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the "Trigger Job in a Bag." We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA/SA. The Trigger Job in a Bag is about 80% of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a "Trigger Job," with this kit.
PLEASE NOTE:
This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance or 92XI; these pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
- Trigger Bar
- Hammer, Sear
- Sear Spring
- Trigger Spring
- Hammer Strut
- Reduced Power Hammer Spring
To make a purchase, please select one option from each group:
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
- Black (factory)
- NP3 (nickel teflon/stainless color)
Hammer Option:
Trigger Bar:
Hammer Spring Weight:
With the following hammer springs, your DA/SA pull weight will be approximately
- 12# DA: 5.6 to 6.4lbs
- 13# DA: 6.3 to 7lbs
- 14# DA: 7 to 7.5lbs
- Single Action for all: 3.5 - 4lbs
LEAD TIMES:
Black: In stock - Shipping in 3-5 Business Days
NP3: In Stock- Shipping in 3-5 Business Days
Common Customer Confusion:
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80% of what we can do if we have the gun itself.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
- FAQ:
- TJIB FAQ
- Warranty Info:
- Click Here To Read Our Warranty & Return/Exchange Policy
-
-
TJIAB with Optimized Performance Trigger Bar
I ordered the Trigger Job in a Bag with the Optimizer Performance Trigger Bar for my Italian-made 92 with a born on date of 2013, which is the year I bought it. I decided to favor reliability over outright pull weight and so went with the 13lb hammer spring. Installation took some time, primarily because I took the opportunity to clean and examine as I went (and the roll pin for the hammer spring cup just plain sucks to remove on Italian guns). I fussed and fussed with the trigger bar, which wouldn't even release the SA pull. A timely video of Ernest showing where to carefully "stone" off a trace amount of metal from the over-travel stop had me visiting a big box home improvement store to buy a tile polishing stone (read: brick) which did the trick. I have 4,000+ rounds through the gun-most of which with a "D" hammer spring. I thought it was great: about 9.0lb DA/4.5lb SA. Now having installed this great piece of kit, I realize: 1) just how much my former trigger mechanism stacked, and 2) how glassy a good trigger can feel. ...oh, and it's 6.5lb DA on the dot and 3.5lb SA. Perfect. Just perfect. The lighting-quick reset is just a silly cool bonus. Thanks for all your doing to blossom the 92 into the gun we all knew it could be! All those striker-fired guys don't know what they're missing...and I kind of like it that way.
-
Trigger Job In a Bag
Just installed my fourth TJIB. Installation is simple and the results are extraordinary! Using the 12lb hammer spring, I’m getting right at 6lbs on double action and 3.5lbs on single action, but what’s truly remarkable is the smoothness. The double action glides straight through to the break, without hesitation and the single action is reminiscent of the break on a 1911. I won’t own a Beretta without a TJIB now. Thanks so much for this fine product, Ernest!
-
Trigger job in a bag- nickle boron
Greatly improved the trigger on my 92 ltt. Much smoother and lighter trigger pull. The silver trigger bar and hammer complimented the silver trigger. Would definitely buy again.
-
TJIB - WOW!!
Installed with little a little difficulty mainly getting the sear spring seated thanks to my XL hands. I followed the excellent video and completed the install. However, the hammer wouldn't cock, in fact, it wouldn't move more than a 1/3 inch. I contacted LTT and they suggested the hammer strut did not seat correctly. A little manipulation with a punch and the hammer and the strut seated. My 92G now has a butter smooth DA (6 lbs 8 oz) and SA (3 lbs 1 oz). Trigger weight based on average of 5 pulls each, in a vise, with a Lyman digital pull gauge. Very happy with the kit, LTT, and of course with my 92.
-
Trigger Job in a Bag - 92/96/M9 Series
just wished I knew that the Langdon triggerbar was coming out
-
Trigger in a bag
Easy installation and works as described. Good purchase. Quick shipping.
-
WOW!!!!
I cannot imagine pulling that stock trigger again! This was such an upgrade it is by far the smoothest double action trigger I have in my collection! Just amazing!!!
-
Trigger job in a bag.
I went with the 12# and elite 2 hammer. Works 100% with cci primers (all that I used). Unbelievably smooth in double and single action. I used to shoot a 92 in 1999 with all the trick parts you offered when LTT was in Virgina. 20 years latter and this kit has been perfected. Well done!
