After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the "Trigger Job in a Bag." We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA/SA. The Trigger Job in a Bag is about 80% of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a "Trigger Job," with this kit.
PLEASE NOTE:
This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance or 92XI; these pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
To make a purchase, please select one option from each group:
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
Hammer Option:
Trigger Bar:
Hammer Spring Weight:
With the following hammer springs, your DA/SA pull weight will be approximately
LEAD TIMES:
Black: In stock - Shipping in 3-5 Business Days
NP3: In Stock- Shipping in 3-5 Business Days
Common Customer Confusion:
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80% of what we can do if we have the gun itself.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
I bought three Beretta 92 series handguns. All three had terrible triggers. I purchased three TJIBs. The double action and single action trigger press on each is now outstanding. I installed the TJIBs myself and had an issue with my installation. I called customer service and received the assistance I needed. Thank you for a great product and your your friendly assistance.
Absolutely amazing. I’m transitioning from striker fired handguns back to da/sa after watching Mr. Langdons videos and after watching Mickey at carry trainer and this kit is a must . Thank you
I have an LTT 92 that was ordered with Ernest's trigger work and decided to order the kit with the optimized trigger bar to drop into my Wilson Centurion. I can't tell the difference in pull weight & smoothness which says alot for the value for these kits. While I wasn't unhappy with the Wilson trigger bar reset in the Centurion, the new LTT Optimized trigger bar was very noticeable upgrade in comparison.
Fantastic, in my quest to return to metal guns with hammers. I needed to do something about my 92 compacts rough trigger. The trigger job in a bag was perfect easy install, though trigger return spring and my fat fingers did have a brief anxious moment. The final result is a very smooth DA and appropriate SA trigger. If you like the 92 this is a fantastic upgrade I went with the 13 pound hammer spring, in my mind about the best compromise.
This was well worth every penny and highly recommended for anyone wanting to make their Beretta feel like a completely different sidearm. I had no experience disassembling a Beretta M9/92 and this took me about 30-40 minutes after watching Ernest Langdon's video. I went with the Langdon trigger bar and a 12# hammer spring in my kit and I had no light strikes in 500+ rounds with the majority being S+B which is known for harder primers than U.S. ammo. I ended up with about 6.5# DA and about 3.5# SA and the reset is very short I would say even a tiny bit shorter than my Sig Legion P226. Buy this without hesitation this is the simplest project to install that yields amazing results. For reference my installation was done on a 92X Full Size that came with D spring from factory.
I installed this in a NP3ed 92G Centurion. The video directions were excellent, the results in the pistol were incredible, with about a 6# DA pull, and a really short reset. I went with a 14# hammer spring in an effort to get better ignition when I have a .22 practice kit fitted. A 12# hammer spring has given me 100% ignition with 9mm.
100% satisfied! Installed in about 15min following the youtube video instructions. Dropped right in and now I have a smooth DA pull and a SA that goes off when I "think" about pulling the trigger. Smooth. Its my first Elite LTT with a TJIAB so I am not sure how much the NP3 helps. I assumed LTT offers it b/c it makes a difference. Will be ordering another soon for my M9A1.
I decided to do the whole kit instead of just the trigger bar and elite hammer. It was a drop-in fit to my M9A3 and made the already good trigger even lighter & crisper with a 14lb hammer spring. The stock reset was too long for my preference and the optimized trigger bar solved that.
Recently purchased an Elite LTT at my local gun store. I had some questions about the TJIAB and sent LTT a message. They responded very quickly and answered my question. I then purchased their TJIAB and watching Ernest's installation video, installed in my new Elite LTT. This pistol is top of the line and the craftsmanship they put into each component of the trigger job was absolutely perfect. Thank you Langdon Tactical for all you do! I have since ordered and installed a 2nd TJIAB for my 92X Centurion because of the excellent results of the first one!!
