LTT Trigger Job in a Bag - Beretta 92/96/M9 Series
Langdon Tactical
$180.00
(228 reviews)
Write a Review
Write a Review
Langdon Tactical
LTT Trigger Job in a Bag - Beretta 92/96/M9 Series
After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the "Trigger Job in a Bag." We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA/SA. The Trigger Job in a Bag is about 80% of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a "Trigger Job," with this kit.
PLEASE NOTE:
This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance or 92XI; these pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
- Trigger Bar
- Hammer, Sear
- Sear Spring
- Trigger Spring
- Hammer Strut
- Reduced Power Hammer Spring
To make a purchase, please select one option from each group:
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
- Black (factory)
- NP3 (nickel teflon/stainless color)
Hammer Option:
Trigger Bar:
Hammer Spring Weight:
With the following hammer springs, your DA/SA pull weight will be approximately
- 12# DA: 5.6 to 6.4lbs
- 13# DA: 6.3 to 7lbs
- 14# DA: 7 to 7.5lbs
- Single Action for all: 3.5 - 4lbs
LEAD TIMES:
Black: In stock - Shipping in 3-5 Business Days
NP3: In Stock- Shipping in 3-5 Business Days
Common Customer Confusion:
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80% of what we can do if we have the gun itself.
PLEASE SEE OUR FAQ Page for model listings to verify the TJIB will work for you.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
228 Reviews Hide Reviews Show Reviews
-
Sheer Perfection
Don't think "Is this worth it?". It is. Do it. aeugh.jpg
-
TJIB Review
The LTT TJIB is a welcome improvement to my M9A3 pistol. Total transparency: I hand-picked my pistol from five G models at the store it was purchased from so the trigger was good, however, there was noticeable stacking at the end of the trigger stroke just prior to the seat releasing the hammer. The TJIB arrived in just two days. All parts were present in the package. I inspected all the parts the the level of polishing was impressive as I do not usually possess the patience to even remotely approach the degree of polish on the hammer and sear interfaces. There was no fitting required; everything worked as advertised. The results were great. Trigger weight did not drop much (I stayed with a 14# hammer spring) but you could tell there was a massive reduction in “drag” or friction in the fire control group. The stacking at the end of the trigger stroke remained BUT IT WAS MUCH LESS PRONOUNCED and not noticeable at the range while shooting. It was well worth the money and time. Purchase without hesitation! Thank you, LTT
-
TJIB in 92A1
I installed the TJIB in my 92A1 using Mr. Langdon's video instruction. The trigger bar did not fit directly and I had to remove material at the front of the pin with a medium stone just as expected per the excellent video. The take up on the trigger was greatly reduced as well as the DA/SA trigger pull weight. The options chosen were the Langdon Optimized trigger bar and the Beretta Elite hammer with a 13 lb hammer spring. The reduction in trigger pull was very noticeable in contrast to the D type spring. Congratulations to Mr. Langdon and his team in developing a product that greatly improves the shootablity of this piece. I am pleased and absolutely satisfied with the product. I am looking forward to running this gun at the range this weekend.
-
Trigger job in a bag
Excellent as always.....
-
Super smooth trigger pull, incredibly short trigger reset
I had installed a 14 lb hammer spring and steel Beretta trigger and was fairly satisfied with the trigger pull. I had heard about the LTT trigger bar and looked into it. Once I saw the TJIB, I decided to pick up the kit with a 12 lb hammer spring. What a difference! Trigger is ridiculously smooth in DA and SA, and the LTT trigger bar... wow. Seriously impressed with the short SA trigger reset. All the other polished parts were icing on the cake. By the way, I did not need to file/stone the trigger bar in my M9. If you're on the fence, just buy it and you won't be disappointed.
-
Trigger
Put in my new Beretta M9A3. Works great.
-
Trigger in a bag 92
One awesome product changes the whole trigger of the gun
-
Crazy good
This product is amazing! The 7lb DA pull is smooth as butter with a short crisp break at 4lbs on the SA pull. The most impressive part is the insane short reset. The trigger resets shorter than my 1911s! Buy this kit!
-
Trigger job in a bag
I have a Langdon 92 one of absolute favorite pistols installed this kit it took off a pound or more from double and single action 7.5 and 3.5 no creep in trigger and reset is as impressive as the trigger pull my kit had the 13lb spring
Videos Hide Videos Show Videos
