LTT Elite LTT RDO LE Duty Model
The Duty Model Elite LTT with RDO is a factory Beretta Elite LTT 92 pistol with Langdon Tactical's RDO Solution - this pistol does NOT have the LTT Trigger Job, OP Trigger Bar, NP3, or any other LTT customizations. It's the factory 92 Elite LTT with the LTT Red Dot Ready Slide.
Approved for Duty Use by Los Angeles County Sheriffs Department. Must use your LASD County Email and Contact information in order for this order to be finalized.
Once your order is finalized shipping is 2-5 business days
Please see our Firearms Purchase Policy prior to checking out - by purchasing a firearm from LTT you confirm that you have read and understand our Firearms Purchase Policy.
Q: What is the cowitness of the RDO BUIS?
A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.
Q: What red dot optics are supported by the LTT RDO Solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- RMR to Plate Screws:
- For attaching a Holosun to the RDO Plate use: 4x40 – 5/16
- For attaching an RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our Doctor Plate fits:
- Docter/Noblex Sight C
- Docter/Noblex sight 2+
- Docter/Noblex sight III
- Docter/Noblex QUICKsight 5.0 VR
- Noblex Sight G
- Vortex Venom
- Burris Fastfire 2*
- Burris Fastfire 3*
- Delta Optical MiniDot*
- Delta Optical MiniDot II*
- Hawke Reflex 1×25*
- Sightmark Mini Shot Pro Spec*
- Sightmark Mini Shot M-Spec
- Leica Tempus
- MAKdot 1×25
- Vomz Pilad 1×20
- Doctor Optic to Plate Screws:
- Doctor to RDO Plate use: 4x40 - 3/8 or 4x40 - 5/16
Our Sig Romeo/Delta Plate fits (no built-in rear sight):
- Leupold Delta Point Pro
- Sig Sauer Romeo 2
- Delta/Romeo Optic to Plate Screws:
- Delta/Romeo: Delta/Romeo to RDO Plate use: 4x40 - 1/2
Our HE509T Plate fits:
- Holosun HE509T
- HE509T Optic to Plate Screws:
- Holosun 509T: Holosun to the RDO Plate use: 4x40 – 5/16
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- Warning: This plate will not fit the 407/507K optics. While the manufacturer lists the footprint as the same, the mounting post has a different height on the EPS optic and a slight difference in the size of the optic body.
- EPS Optic to Plate Screws:
- EPS: EPS to RDO plate use: 4x40 - 5/16