Springer Precision Magazine Extension (+4 Round Capacity)

Springer Precision Magazine Extension (+4 Round Capacity)

The Springer Precision Magazine Extension Kit adds 4 rounds of capacity to Beretta 92 MecGar Magazines.

• The Beretta 92 Kit can be added to your MecGar 18-round magazine to give you 22 rounds or to your 20-round magazine to give you 22 round capacity.

The kit includes the extension and the extra power spring. The Springer Precision Kits when added to the 92 Mer-Gar mags make the mags 140mm in total length.

Note: The PX4 Kit has been superseded by a new part number from Springer Precision, see the Springer Precision Magazine Extension Page

INSTALL INSTRUCTIONS:

Installation Instructions

When installing the new spring and base plate in your magazine, do NOT use the factory mag catch plate.

1. Disassemble magazine.
2. Remove old spring from follower.
3. Replace spring with NEW spring on factory follower.
4. Compress Spring all the way into the magazine body.
5. Slide the Springer Precision base plate into place and let spring release into magazine extension.
6. Use small allen key to turn amen screw counter clockwise to lock extension in place (DO NOT OVERTIGHTEN)

REGULATED STATES WARNING:

Gun laws are mandated by state-level governments; therefore, they vary state-to-state. State gun laws include regulations on purchasing firearms, concealed carry permits, and ammunition. Check your local laws before ordering this product. Check your local laws for any other regulations.

We cannot sell magazines with a capacity greater than your state allows. If you purchase magazines with a capacity greater than is allowed by your state and/or local regulations, your order will be canceled. 

The states with magazine restrictions are: Washington, Vermont, Rhode Island, Oregon, New York, New Jersey, Massachusetts, Maryland, Hawaii, Delaware, Connecticut, Colorado, and California. Effective: February 1st, 2023

DISCLAIMER:

;We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.