Optimized Performance Trigger Bar

The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92/M9A1/M9A3 OR PX4.

You can install it as a standalone upgrade, or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.

The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.

ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.

Please note:The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY.

92/96/M9 FAQ's:

Will the OP Trigger Bar work with the existing trigger job/trigger job in a bag I have? Yes it will.
Will the OP Trigger Bar work with the Short Reach Trigger? Yes.
Is this drop in ready? Yes. It may need to be fitted, but less than the other trigger bars we sell. **92X Performance requires Gunsmith Fit**
What 92's will this work in? It will work in the 92F models and later and *may* also work with 92SB's. It will not work with the 92S.
Do I need to have a trigger job on my gun in order for this to work? No, you do not.
Is the firing pin block functional and gun still drop safe with the installation of this OP Trigger Bar? Yes.
Will the OP Trigger Bar work on a 92 Compact and Centurion? Yes.
Will the OP Trigger Bar work on the 92D? Yes, it will work, but it will not reduce the reset.
Does the OP Trigger Bar reduce pre-travel? No.
Will the OP Trigger Bar work on a 92D or Double action only model? The hard finish should make the Double action smoother, but it will not reduce the reset. The OP Trigger Bar shortens the reset in single action only.
I Installed my OP Trigger Bar and now I feel a 'hitch' in DA? At the very beginning of the trigger pull in DA, the 'hitch' is the half cock notch. All of them do it, this is normal, you may just notice it more because it's actually smoother. You may even hear it, but rest assured, it's normal. It's a safety measure and part of DA/SA operation.

DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.

281 Reviews Hide Reviews Show Reviews

5
Trigger bar

Posted by Jeff foster on Oct 19th 2020

Bought the trigger bar for PX storm. Installed in about 15-20 minutes. Vast improvement over the stock bar. Shoots great.
5
Best upgrade to my 92FS

Posted by Austin McCollum on Oct 3rd 2020

The LTT optimized trigger is the best upgrade I have installed on my 92FS. It makes it more enjoyable to shoot and peace of mind reliability. It dropped right in without any fitting required on my particular pistol.
5
Optimized trigger bar

Posted by Timothy Schaffer on Sep 26th 2020

Simply amazing! I was very surprised with the reset improvement. So much so that I bought a second one! Money well spent. Thanks to the Langdon team!
5
What an incredible simple upgrade to the trigger function.

Posted by Steve Gill on Sep 22nd 2020

I have a Beretta 92FS from the early 90s. The trigger had already been polished by a gunsmith years ago and recently I changed to a 12# hammer spring. The DA is 8 and the SA 3.5. However, it still had a sloppy trigger. Too much travel to the reset and then some travel back to the wall. There was too much over-travel after the trigger release as well. With a 5 minute upgrade using the Optimized Trigger Bar, all the bad stuff was gone. Short reset and no over-travel. After the reset, your are right on the wall. I am now a full Langdon believer. I still have my great DA/SA trigger values and now a great reset and a firm wall. My wall previously was a bit soft. My Beretta trigger now performs as well as my Apex Forward Set Trigger on my S&W M&P 2.0. I really never dreamed I would have this trigger on my 92. Thank you!
5
Optimized Performance Trigger Bar (NP3)

Posted by Reed Kevin on Sep 19th 2020

I purchased the NP3 trigger bar and hammer springs to modify the Wilson Combat Brigadier Tactical Vertec and it made the trigger pull noticeably smoother. I initially just wanted the Wilson & the LTT Elite to have the same trigger pull characteristics. Now the WC has a slightly better trigger pull so I’ll have to purchase another NP3 trigger bar and install it into my LTT Elite (LTT’s trigger job is simply outstanding). Thanks! Oh, purchase with no reservations!
5
Must have Upgrade

Posted by Mario on Sep 17th 2020

The LTT Trigger bar for the 92 and PX4 is a must have upgrade for your favorite Beretta. I installed on both and what a difference.
5
Optimized Performance Trigger Bar

Posted by bob juliano on Sep 11th 2020

Works Great. Easy installation using your video. Thank you!
5
Optimized trigger bar

Posted by Scott Edwards on Sep 7th 2020

I purchased the optimized trigger bar for my 92X Centurion. No issues with installation and no fine tuning was needed. Not much difference in pre-travel but the reset turns this into a whole other machine. I definitely recommend this upgrade.
5
Easy upgrade

Posted by Kevin on Sep 7th 2020

Took less than 5 minutes to install, now it's a smoother DA pull and a much shorter reset. No fitting/dremelling needed for my ltt compact