OP Trigger Bar
Beyond my expectations. So good, I wish I'd ordered 2 top begin with. Will definitely be adding this to all my Berettas.
Beretta Optimized Performance Trigger Bar
- SKU:
- OPTB
$85.00 - $110.00
The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92, M9A1, M9A3 OR PX4.
You can install it as a standalone upgrade or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.
The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.
ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.
Please note:The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY.
You may see minimal improvement with the 92GTS, 92X Performance, and 92XI models.
92/96/M9 FAQs:
- Will the OP Trigger Bar work with the existing trigger job/trigger job in a bag I have? Yes it will.
- Will the OP Trigger Bar work with the Short Reach Trigger? Yes.
- Is this drop in ready? Yes. It may need to be fitted, but less than the other trigger bars we sell. 92X Performance requires Gunsmith Fit
- What 92's will this work in? It will work in the 92F models and later and may also work with 92SB's. It will not work with the 92S.
- Do I need to have a trigger job on my gun in order for this to work? No, you do not.
- Is the firing pin block functional and gun still drop safe with the installation of this OP Trigger Bar? Yes.
- Will the OP Trigger Bar work on a 92 Compact and Centurion? Yes.
- Will the OP Trigger Bar work on the 92D? Yes, it will work, but it will not reduce the reset.
- Does the OP Trigger Bar reduce pre-travel? No.
- Will the OP Trigger Bar work on a 92D or Double action only model? The hard finish should make the Double action smoother, but it will not reduce the reset. The OP Trigger Bar shortens the reset in single action only.
- I Installed my OP Trigger Bar and now I feel a hitch in DA? At the very beginning of the trigger pull in DA, the hitch is the half cock notch. All of them do it, this is normal, you may just notice it more because it's actually smoother. You may even hear it, but rest assured, it's normal. It's a safety measure and part of DA/SA operation.
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
FAQ: OP Trigger Bar FAQ
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
-
-
Optimized Performance Trigger Bar
Easy to install, no fitting required. Replaced a Wilson Combat trigger bar with the Langdon Tactical Optimized Performance Trigger Bar. Double action trigger pull is similar to using Wilson Combat trigger bar. Single action trigger pull is much smoother and has much shorter reset than Wilson Combat.
-
Optimized Performance Trigger Bar
I had to stone the over-travel nub on mine to get the single action to work. After just a few swipes I installed it and it works great. The double action is very smooth and the single action reset is amazing. No overtravel either. The Italian 92fs that I installed this on now has the best trigger of all my DA/SA pistols.
-
Optimum performance trigger bar
This had to be the easiest upgrade I've done to any of my firearms. Drop in part, with no adjusting or stoning. I already had a d hammer spring in.I feel as though the D/A is around 7 or 8 lb.s. I haven't measured it or shot it yet.But dry firing my and function checks seem very positive. Now I'm looking to get my barrel cut& crowned.Be in touch'Thanks!
-
Unbelievably Better!
It was very easy to install with no modifications needed, and made the reset unbelievably short. You have to experience it to truly appreciate it!
-
Optimized Performance Trigger Bar
Excellent product. Put it on my 92 Elite LTT. Much better reset. Thanks!
-
Great addition to my Beretta
I recently purchased an Optimized Trigger Bar for my early 90's Inox 92FS. I had already replaced several parts with Wilson Combat's line but thought I'd give Langdon Tactical a try. I am extremely pleased with the quality and function of the part. The NP3 finish looks great with the stainless steel. I did have to fit the part as I had trouble with my single action after the initial install. I used a Norton medium grit stone and it only took a few minutes to get the part functioning perfectly. I highly recommend Langdon Tactical! Thanks for a great product.
-
Trigger Bar
With the Langdon's Trigger Bar, I had to do some slights modification. Took me some time to file it down but was able to get it to work. Real short reset. Live it. Can't wait to take it out to the range
-
OPTIMIZED PERFORMANCE TRIGGER BAR
Awesome product... exceeded my expectations!!
Related Products
-
Out of stock
-
Out of stock
-
Out of stock
-
Reviews
-
OP Trigger Bar
Beyond my expectations. So good, I wish I'd ordered 2 top begin with. Will definitely be adding this to all my Berettas.
-
Optimized Performance Trigger Bar
Easy to install, no fitting required. Replaced a Wilson Combat trigger bar with the Langdon Tactical Optimized Performance Trigger Bar. Double action trigger pull is similar to using Wilson Combat trigger bar. Single action trigger pull is much smoother and has much shorter reset than Wilson Combat.
-
Optimized Performance Trigger Bar
I had to stone the over-travel nub on mine to get the single action to work. After just a few swipes I installed it and it works great. The double action is very smooth and the single action reset is amazing. No overtravel either. The Italian 92fs that I installed this on now has the best trigger of all my DA/SA pistols.
-
Optimum performance trigger bar
This had to be the easiest upgrade I've done to any of my firearms. Drop in part, with no adjusting or stoning. I already had a d hammer spring in.I feel as though the D/A is around 7 or 8 lb.s. I haven't measured it or shot it yet.But dry firing my and function checks seem very positive. Now I'm looking to get my barrel cut& crowned.Be in touch'Thanks!
-
Unbelievably Better!
It was very easy to install with no modifications needed, and made the reset unbelievably short. You have to experience it to truly appreciate it!
-
Optimized Performance Trigger Bar
Excellent product. Put it on my 92 Elite LTT. Much better reset. Thanks!
-
Great addition to my Beretta
I recently purchased an Optimized Trigger Bar for my early 90's Inox 92FS. I had already replaced several parts with Wilson Combat's line but thought I'd give Langdon Tactical a try. I am extremely pleased with the quality and function of the part. The NP3 finish looks great with the stainless steel. I did have to fit the part as I had trouble with my single action after the initial install. I used a Norton medium grit stone and it only took a few minutes to get the part functioning perfectly. I highly recommend Langdon Tactical! Thanks for a great product.
-
Trigger Bar
With the Langdon's Trigger Bar, I had to do some slights modification. Took me some time to file it down but was able to get it to work. Real short reset. Live it. Can't wait to take it out to the range
-
OPTIMIZED PERFORMANCE TRIGGER BAR
Awesome product... exceeded my expectations!!