Optimized Performance Trigger Bar
Excellent product. Put it on my 92 Elite LTT. Much better reset. Thanks!
The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92/M9A1/M9A3 OR PX4.
You can install it as a standalone upgrade, or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.
The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.
ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.
Please note:The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY.
You may see minimal improvement with the 92GTS, 92X Performance, and 92XI models.
92/96/M9 FAQ's:
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
Excellent product. Put it on my 92 Elite LTT. Much better reset. Thanks!
I recently purchased an Optimized Trigger Bar for my early 90's Inox 92FS. I had already replaced several parts with Wilson Combat's line but thought I'd give Langdon Tactical a try. I am extremely pleased with the quality and function of the part. The NP3 finish looks great with the stainless steel. I did have to fit the part as I had trouble with my single action after the initial install. I used a Norton medium grit stone and it only took a few minutes to get the part functioning perfectly. I highly recommend Langdon Tactical! Thanks for a great product.
With the Langdon's Trigger Bar, I had to do some slights modification. Took me some time to file it down but was able to get it to work. Real short reset. Live it. Can't wait to take it out to the range
Awesome product... exceeded my expectations!!
Outstanding addition, along with the D spring to improve DA trigger pull. I highly recommend this simple to install part. Well worth the money for the improvement you get.
I was excited when I saw the announcement about the Optimized Performance Trigger Bar. I ordered two of them. One with the NP3 and the other with the Duralube finish. I installed the NP3 version in my 92 LTT Elite and the other went into a 92A1 which has one of LTT's superb Trigger Job in a Bag in it. Both were drop in parts with zero fitting required. I took them to my range today for a test fire and both worked flawlessly with no binding or failures of any kind. The double action on both firearms seemed smoother and the single action reset is nothing short of phenomenal. This upgrade puts the single action reset on par with any 1911 out there. If you are looking for a trigger bar which will provide significant improvements to the trigger on your Beretta 92, Langdon Tactical is your one stop shop.
I have bought the Wilson Combat Trigger Bar and I couldn't get it to work with My New Beretta M9A3 Handgun. I was afraid of Buying the Optimized Performance Trigger Bar because I figured that it was just more of the same. Well it's not !!! The Optimized Trigger Bar is just a wonder to be seen. It just Dropped in without any fitting and it made the RESET so much better. I got smoother and the Break was PERFECT !!! I would buy it again. And I would put it in any BERETTA 92 model. Buy it, you'll be glad You did !!!
I've swapped out four of these OP trigger bars so far and three of them have been drop-in with no fitting necessary. A Centurion with a Wilson SRT took fitting by stoning down the over-travel hump, I was too cautious at first because it's hard to see how much material I was removing. It took maybe 10 minutes longer because I had the bar in and out a few times before it was perfect just like the others. I plan on ordering a couple every month until all my 92's are Optimized.
Sweet! Going to run LTT in a local USPSA Hosier match..