Optimized performance trigger bar
Superb accessory to all my Beretta's
Beretta Optimized Performance Trigger Bar
- SKU:
- OPTB
$85.00 - $110.00
The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92, M9A1, M9A3 OR PX4.
You can install it as a standalone upgrade or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.
The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.
ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.
Please note:The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY.
You may see minimal improvement with the 92GTS, 92X Performance, and 92XI models.
92/96/M9 FAQs:
- Will the OP Trigger Bar work with the existing trigger job/trigger job in a bag I have? Yes it will.
- Will the OP Trigger Bar work with the Short Reach Trigger? Yes.
- Is this drop in ready? Yes. It may need to be fitted, but less than the other trigger bars we sell. 92X Performance requires Gunsmith Fit
- What 92's will this work in? It will work in the 92F models and later and may also work with 92SB's. It will not work with the 92S.
- Do I need to have a trigger job on my gun in order for this to work? No, you do not.
- Is the firing pin block functional and gun still drop safe with the installation of this OP Trigger Bar? Yes.
- Will the OP Trigger Bar work on a 92 Compact and Centurion? Yes.
- Will the OP Trigger Bar work on the 92D? Yes, it will work, but it will not reduce the reset.
- Does the OP Trigger Bar reduce pre-travel? No.
- Will the OP Trigger Bar work on a 92D or Double action only model? The hard finish should make the Double action smoother, but it will not reduce the reset. The OP Trigger Bar shortens the reset in single action only.
- I Installed my OP Trigger Bar and now I feel a hitch in DA? At the very beginning of the trigger pull in DA, the hitch is the half cock notch. All of them do it, this is normal, you may just notice it more because it's actually smoother. You may even hear it, but rest assured, it's normal. It's a safety measure and part of DA/SA operation.
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
FAQ: OP Trigger Bar FAQ
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
-
-
OPTIMIZED PERFORMANCE TRIGGER BAR
After building my other Beretta with Wilson combat optimized trigger bar and not really noticing a differents.. I decided to give the Langdon Tactical OPTIMIZED PERFORMANCE TRIGGER BAR a try on my other 92 pistol.. and I am not disappointed.. the reset is short and very noticeable and the double action seems smoother also.. I would recommend the Langdon Tactical products to everyone that wants to improve their shooting experience with the Beretta 92 pistol..
-
Awesome!
I installed this trigger bar in my M9A3 with Beretta's Xtreme-S Trigger Group, and the single action trigger pull and reset is like a high end 1911. Absolutely essential!
-
Trigger bar
Installed my optimized trigger bar today. Dropped right in. I had installed a 26 lbs mainspring and polished all of the internal parts several years ago. Well worth the upgrade. Right now it is phenomenal. Smooth as butter. I ordered a 14 lbs mainspring to go with it. Should be a tack driver.
-
Installed the LTT trigger bar tonight
I live in Maricopa, AZ and ordered this on 1-15-2020 and received it on 1-16-2020. Ernest is about 30 miles away from me. So, I'm under the impression that this trigger bar is not just a drop in and that having to do some filing is the norm, which was fine with me. I have an Italian made M9A3 and the trigger has been NICE from day one. I took my time and filed the nub down little by little until the dbl action worked reliably and boy it seems to be more consistent now. I really like the reset on it now also, it's about as good as my Sig P226 Legion SAO...maybe 1/16". I tried it with the Wilson short reach trigger and I didn't like the feel of that trigger. When I was messing with filing the trigger bar, I was going back and forth on seeing where the trigger bar was with the 2 triggers, and for some reason, the Wilson trigger would have required me to take even more material off the nub of the trigger bar to get the dbl action to function. I didn't like the Wilson trigger in single action. It was too close to the grip and just didn't feel right. I also tried a Wilson 14# spring and didn't like it and put the D spring back in. I think a lot of the Wilson parts are just hype. An M9A3 is quality and not much needs to be done to it. The Wilson low profile safety and mag assist are the only 2 upgrades from them that I've liked. I went with a Beretta steel guide rod, elite 2 hammer, and stayed with Beretta springs. Lok bogie grips were the finishing touch.
-
The best upgrade
I've got this and the trigger job in a bag from Landgon. If you can only pick one upgrade for your Beretta, do yourself a favor and make it this part. It's such a dramatic improvement, and combined with the trigger job it's a night and day difference over stock.
-
LTT Optimized Performance Trigger Bar
Wow, I thought I'd tuned my LTT, but this upgrade makes the Beretta LTT feel better than my SRT triggers in my Sig Classic pistols! Great job engineering this upgrade!!!!
-
Optimized performance trigger bar
Excellent product have one for each of my Beretta's
-
OP Trigger Bar
The reset with this trigger bar is amazing. Totally worth it. The trigger pull is smoother compared to stock trigger bar. I installed it on a late 90's 92fs and had to shave a slight amount off the trigger bar stop or else the single-action trigger wouldn't release.
Related Products
-
Out of stock
-
Out of stock
-
Out of stock
-
Reviews
-
Optimized performance trigger bar
Superb accessory to all my Beretta's
-
OPTIMIZED PERFORMANCE TRIGGER BAR
After building my other Beretta with Wilson combat optimized trigger bar and not really noticing a differents.. I decided to give the Langdon Tactical OPTIMIZED PERFORMANCE TRIGGER BAR a try on my other 92 pistol.. and I am not disappointed.. the reset is short and very noticeable and the double action seems smoother also.. I would recommend the Langdon Tactical products to everyone that wants to improve their shooting experience with the Beretta 92 pistol..
-
Awesome!
I installed this trigger bar in my M9A3 with Beretta's Xtreme-S Trigger Group, and the single action trigger pull and reset is like a high end 1911. Absolutely essential!
-
Trigger bar
Installed my optimized trigger bar today. Dropped right in. I had installed a 26 lbs mainspring and polished all of the internal parts several years ago. Well worth the upgrade. Right now it is phenomenal. Smooth as butter. I ordered a 14 lbs mainspring to go with it. Should be a tack driver.
-
Installed the LTT trigger bar tonight
I live in Maricopa, AZ and ordered this on 1-15-2020 and received it on 1-16-2020. Ernest is about 30 miles away from me. So, I'm under the impression that this trigger bar is not just a drop in and that having to do some filing is the norm, which was fine with me. I have an Italian made M9A3 and the trigger has been NICE from day one. I took my time and filed the nub down little by little until the dbl action worked reliably and boy it seems to be more consistent now. I really like the reset on it now also, it's about as good as my Sig P226 Legion SAO...maybe 1/16". I tried it with the Wilson short reach trigger and I didn't like the feel of that trigger. When I was messing with filing the trigger bar, I was going back and forth on seeing where the trigger bar was with the 2 triggers, and for some reason, the Wilson trigger would have required me to take even more material off the nub of the trigger bar to get the dbl action to function. I didn't like the Wilson trigger in single action. It was too close to the grip and just didn't feel right. I also tried a Wilson 14# spring and didn't like it and put the D spring back in. I think a lot of the Wilson parts are just hype. An M9A3 is quality and not much needs to be done to it. The Wilson low profile safety and mag assist are the only 2 upgrades from them that I've liked. I went with a Beretta steel guide rod, elite 2 hammer, and stayed with Beretta springs. Lok bogie grips were the finishing touch.
-
The best upgrade
I've got this and the trigger job in a bag from Landgon. If you can only pick one upgrade for your Beretta, do yourself a favor and make it this part. It's such a dramatic improvement, and combined with the trigger job it's a night and day difference over stock.
-
LTT Optimized Performance Trigger Bar
Wow, I thought I'd tuned my LTT, but this upgrade makes the Beretta LTT feel better than my SRT triggers in my Sig Classic pistols! Great job engineering this upgrade!!!!
-
Optimized performance trigger bar
Excellent product have one for each of my Beretta's
-
OP Trigger Bar
The reset with this trigger bar is amazing. Totally worth it. The trigger pull is smoother compared to stock trigger bar. I installed it on a late 90's 92fs and had to shave a slight amount off the trigger bar stop or else the single-action trigger wouldn't release.