The best upgrade
Outside the trigger pack already from LLT this is the icing on the cake for a near perfect trigger
The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92/M9A1/M9A3 OR PX4.
You can install it as a standalone upgrade, or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.
The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.
ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.
Please note:The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY.
You may see minimal improvement with the 92GTS, 92X Performance, and 92XI models.
92/96/M9 FAQ's:
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
Outside the trigger pack already from LLT this is the icing on the cake for a near perfect trigger
The bar was beautifully finished, no machine marks and the NP3 was applied evenly, It was a true drop in part and worked as advertised,
Freaking awesome product! Nothing but the best from LTT!
5 Star
Installed the Optimized Performance Trigger bar in my PX4 last night and I can say that this upgrade is definitely worth it. My gun is a MOD 4 CC originally from Robar, so it already had a trigger job from Ernest and NP3 coating on the internal components. Nonetheless, this upgrade produced a noticeable improvement in over travel and a SIGNIFICANT shortening of the trigger reset in my gun. I didn't notice a significant change in the double action pull personally, but the double action on my PX4 was already fantastic thanks to Ernest. If you want to tighten up your PX4's trigger pull then I think you can't go wrong with this trigger bar.
Have had the LTT PX4 Compact Carry for awhile now, by far and away my preferred daily carry pistol. About the only thing you could gripe about with the pistol was the over travel and trigger reset was a bit on the much side. Not crazy bad, but room for improvement. The NP3 finished trigger bar here does just that, it cleans up both issues very nicely reset is absolutely perfect for carry gun use. The over travel is improved as well, I should have put the original trigger bar on a gauge before I changed out to this one, but I think the D/A trigger pull is a bit smoother as well. It however, at least on my copy was good to start with. Installation was fast and easy, might have taken five minutes. Watch the video if in doubt, but no worries no degree in rocket science required. Langdon Tactical's, stuff just always seem to do what they claim, not always the case with some others.
Just installed it in my PX4 Compact Carry. Fit perfectly and dropped in without a hitch. Absolutely freaking amazing results. Trigger reset is a fraction of what it was with the stock part and now as good as any other pistol trigger I've stroked. Very sweet!
Threw this onto a 92X Centurion (combined with a D-spring) - the DA/SA pull is incredible and so is the reset!
Being in the Marine Corps for 7 years now, I shot many M9s for a while now, as well as other variants and clones. Especially in the Marine Corps division matches. Bought the 92A1 for making my version of the Samurai edge from the Resident evil franchise, Even plan on using the firearm for competition. I've simply put a 16ILbs trigger spring from Wilson combat and had a local gunsmith do a trigger job on it as far as the trigger mechanism goes. This Trigger bar does make it that much better and smoother. Even got other Marines who dislike Beretta's or even come to hate them, Impressed with it. I highly recommend this product for anyone with a 92 platform. Its a must have and well worth the money.