Optimized Performance Trigger Bar

$72.00 - $75.00
(260 reviews) Write a Review

The Optimized Performance Trigger Bar from LTT provides significant reduction in reset distance, improved double action, and a reduction in over travel on your Beretta 92/M9A1/M9A3 OR PX4.

You can install it as a standalone upgrade, or combine it with an LTT Trigger job for quicker, smoother, and more predictable shots.

The Black is ArmorLube DLC (Diamond-like Carbon). The NP3 option is the silver/nickel Teflon finish.

ArmorLube-DLC or Diamond-Like Carbon is the most durable and corrosion-resistant coating we have ever used.

Please note: The PX4 Optimized Trigger Bar is Only Available in black DLC finish and works on the PX4 Compact Carry, PX4 Full-Size and Subcompact in 9mm and .40 ONLY. 

92/96/M9 FAQ's:

  • Will the OP Trigger Bar work with the existing trigger job/trigger job in a bag I have? Yes it will.
  • Will the OP Trigger Bar work with the Short Reach Trigger? Yes.
  • Is this drop in ready? Yes. It may need to be fitted, but less than the other trigger bars we sell. **92X Performance requires Gunsmith Fit**
  • What 92's will this work in? It will work in the 92F models and later and *may* also work with 92SB's. It will not work with the 92S.
  • Do I need to have a trigger job on my gun in order for this to work? No, you do not.
  • Is the firing pin block functional and gun still drop safe with the installation of this OP Trigger Bar? Yes.
  • Will the OP Trigger Bar work on a 92 Compact and Centurion? Yes.
  • Will the OP Trigger Bar work on the 92D? Yes, it will work, but it will not reduce the reset.
  • Does the OP Trigger Bar reduce pre-travel? No.
  • Will the OP Trigger Bar work on a 92D or Double action only model? The hard finish should make the Double action smoother, but it will not reduce the reset. The OP Trigger Bar shortens the reset in single action only.
  • I Installed my OP Trigger Bar and now I feel a 'hitch' in DA? At the very beginning of the trigger pull in DA, the 'hitch' is the half cock notch. All of them do it, this is normal, you may just notice it more because it's actually smoother. You may even hear it, but rest assured, it's normal. It's a safety measure and part of DA/SA operation.


DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.


260 Reviews Hide Reviews Show Reviews

  • 5
    A must have for the Xtreme-S Trigger

    Posted by John on Apr 22nd 2023

    I upgraded my M9A4 with the Xtreme-S trigger and was impressed, but also underwhelmed. The trigger was much improved, but still far from perfect. I ordered this trigger bar and the trigger is now perfect. The trigger pull is short and smooth. The reset is extremely short. My groups have shrunk immensely. It was a drop in install.

  • 5
    Great upgrade

    Posted by Phil on Apr 22nd 2023

    Installed on 92fs Compact finding excellent trigger pull short reset very smooth performance. I also installed Landons trigger spring as well.

  • 2
    Trigger job in a bag.

    Posted by Robert Cruickshank on Apr 2nd 2023

    Disappointed. After finally getting the kit, the tiny punches needed, and time to install kit. It won't work/ fit the 92X Performance. Trigger bar requires major work around trigger pin. Has a ledge that needs removing. Sear is totally wrong for this model. Conflicts with safety . Only usable parts are hammer strut and springs. There's $300 bucks pissed away. Even a gunsmith would have to hack up the parts to "make work". So why bother? Then the finish coating is compromised. Best to just get some springs and polish original parts. Another lesson learned on this model. Is a great kit in my 92FS. Just not for the 92X performance.

  • 5
    Optimized Trigger Bar

    Posted by Dave on Feb 17th 2023

    This was the final piece to the puzzle for my M9. I replaced all of the plastic hardware with steel units and converted to a GMod safety set up. Running the gold recoil spring, a 14# hammer spring, and the Wilson trigger spring. Did a complete polish on all the proper engagement points of the hammer, sear, hammer strut, sides of trigger spring, the ends of all of the springs, feed ramp, and etc. This was the last thing needed to make the M9 perfect. The complete elimination of over-travel, the quick reset that this trigger bar provides, and the slippery coating on the bar itself, transformed my M9 completely. In single action, the trigger pull is crisp and much like you’d get from a nicely tuned 1911. I’d highly recommend this product to anyone with this series of pistol. Needed zero modification to work flawlessly. Didn’t have to file away material or anything. Straight drop in and works great. Worth every penny! When I get around to it, I’ll probably grab a ported barrel as well. She shoots like a dream. Thanks guys!

  • 5
    Awesome upgrade

    Posted by Josh Freed on Nov 14th 2022

    I was wanting a better trigger pull on my 92. When I purchased this trigger bar, I expected a change, but was pleasantly surprised with how this changed the trigger pull. I didn’t have to do any work to the trigger bar. I just swapped the stock out with this and it functioned perfect. The double action seems smoother and I’m not sure if it made the pull lighter or the smoothness makes it feel lighter. The single action reset is crazy short. I’m very happy with this upgrade. I already have done a lot of other upgrades the the firearm including changing the hammer spring to a 14#, but this trigger bar seems to really smooth everything out to perfection with the trigger pull.

  • 5
    Perfect with an Italian 92FS

    Posted by Tyler on Oct 3rd 2022

    Thank you LTT for providing this excellent part. I installed this is my Italian 92FS of recent manufacture along with the WC trigger conversion unit, short reach trigger, and skeletonized Beretta hammer. The installation was extremely easy for me and there were no issues at all with single and double stack functioning. I'm glad I bought this piece while I updated almost all internal components of my 92.

  • 4
    GOOD & BAD 92X Performance

    Posted by Matt on Sep 15th 2022

    92X Performance (92XP)- If you are are using in a 92XP then you better have a dremel handy. It absolutely requires filing off a portion of bar that sits below the hammer since the factory shape is a triangle (to allow clearance by the frame) but the LTT bar is rounded so you have reshape it. (wasn't to bad but a dremel is required, way to much to take of by hand file). If I had to redo my purchase over, I would definitely get the NP3 coated one. I wanted to keep the same look as the stock one but the DLC coating "black" does have a bit of gritty feel when pulling the trigger. All in all, it does have a shorter reset than the factory one in the 92XP and I would say it is a worth while purchase. I would of liked to of seen someone else mention these points about the 92XP before I had bought it (hence my review). Hope it helps someone else

  • 5
    A game changer

    Posted by Patrick on Jul 22nd 2022

    The trigger bar is easy to install and makes the reset amazing!! I have it in my PX4, beretta 92 and 96A1.

  • 5
    OP Trigger bar

    Posted by Kelly Taylor on Jul 7th 2022

    Awesome The Langdon LTT trigger bar and short reach trigger make a BIG difference F'n LOVE it. def worth the $$$

Videos Hide Videos Show Videos