TJIB
Absolutely amazing. I’m transitioning from striker fired handguns back to da/sa after watching Mr. Langdons videos and after watching Mickey at carry trainer and this kit is a must . Thank you
We have brought back the Beretta Elite 2 Hammer and the Beretta Match Hammer in our trigger jobs in a bag for a limited time while we await our next batch of LTT Optimized Performance Hammers to arrive
After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the Trigger Job in a Bag. We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA and SA. The Trigger Job in a Bag is about 80 percent of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a Trigger Job with this kit. In August 2025, LTT switched over to a newly designed optimized performance hammer to optimize total trigger job performance in every way with improved sear notch geometry, reduced pre-travel distance, faster lock time, and better firing pin indent with lighter hammer springs. We believe this kit set-up gives you the best Trigger Job Performance and stand behind this hammer design, which has been over a year in development and manufacturing.
PLEASE NOTE
This kit MAY require some fitting for proper install and function. Please watch the install guide video on the Videos tab of this page prior to purchase. We recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance, 92XI, or the 92GTS. These pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
- Trigger Bar
- Hammer
- Sear & Sear Spring
- Trigger Spring
- Hammer Strut
- Reduced Power Hammer Spring
To make a purchase, please select one option from each group
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
- Black (factory)
- NP3 (nickel teflon/stainless color)
Hammer Option
- 2025 LTT Optimized Performance Hammer
- 2025 LTT Optimized Performance Spurless Hammer
Trigger Bar
Hammer Spring Weight
With the following hammer springs, your DA/SA pull weight will be approximately
- 12lb DA: 5.6 to 6.4lbs
- 13lb DA: 6.3 to 7lbs
- 14lb DA: 7 to 7.5lbs
- Single Action for all: 3.5 - 4lbs
LEAD TIMES
Black In stock - Shipping in 1-2 weeks
NP3 In Stock- Shipping in 1-2 weeks
Common FAQ
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have, have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80 percent of what we can do if we have the gun itself.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Please reference our Terms & Conditions. Due to the complexities of complying with the Federal warranty law, Langdon Tactical Technology, Inc. does not offer a written warranty. We continue to stand behind our products and services, and to care for our customers, but we cannot make guarantees or warranties of any kind. This general statement of policies and disclaimers is effective January 1, 2016.
-
-
92 series TJIB
I have an LTT 92 that was ordered with Ernest's trigger work and decided to order the kit with the optimized trigger bar to drop into my Wilson Centurion. I can't tell the difference in pull weight & smoothness which says alot for the value for these kits. While I wasn't unhappy with the Wilson trigger bar reset in the Centurion, the new LTT Optimized trigger bar was very noticeable upgrade in comparison.
-
Trigger Job in Bag
Fantastic, in my quest to return to metal guns with hammers. I needed to do something about my 92 compacts rough trigger. The trigger job in a bag was perfect easy install, though trigger return spring and my fat fingers did have a brief anxious moment. The final result is a very smooth DA and appropriate SA trigger. If you like the 92 this is a fantastic upgrade I went with the 13 pound hammer spring, in my mind about the best compromise.
-
Beretta trigger job in a bag
This was well worth every penny and highly recommended for anyone wanting to make their Beretta feel like a completely different sidearm. I had no experience disassembling a Beretta M9/92 and this took me about 30-40 minutes after watching Ernest Langdon's video. I went with the Langdon trigger bar and a 12# hammer spring in my kit and I had no light strikes in 500+ rounds with the majority being S+B which is known for harder primers than U.S. ammo. I ended up with about 6.5# DA and about 3.5# SA and the reset is very short I would say even a tiny bit shorter than my Sig Legion P226. Buy this without hesitation this is the simplest project to install that yields amazing results. For reference my installation was done on a 92X Full Size that came with D spring from factory.
-
Trigger Job In A Bag with 14# Mainspring & optimized trigger bar
I installed this in a NP3ed 92G Centurion. The video directions were excellent, the results in the pistol were incredible, with about a 6# DA pull, and a really short reset. I went with a 14# hammer spring in an effort to get better ignition when I have a .22 practice kit fitted. A 12# hammer spring has given me 100% ignition with 9mm.
-
TJIAB NP3
100% satisfied! Installed in about 15min following the youtube video instructions. Dropped right in and now I have a smooth DA pull and a SA that goes off when I "think" about pulling the trigger. Smooth. Its my first Elite LTT with a TJIAB so I am not sure how much the NP3 helps. I assumed LTT offers it b/c it makes a difference. Will be ordering another soon for my M9A1.
-
Love the short reset!
I decided to do the whole kit instead of just the trigger bar and elite hammer. It was a drop-in fit to my M9A3 and made the already good trigger even lighter & crisper with a 14lb hammer spring. The stock reset was too long for my preference and the optimized trigger bar solved that.
-
Trigger Job in a Bag
Recently purchased an Elite LTT at my local gun store. I had some questions about the TJIAB and sent LTT a message. They responded very quickly and answered my question. I then purchased their TJIAB and watching Ernest's installation video, installed in my new Elite LTT. This pistol is top of the line and the craftsmanship they put into each component of the trigger job was absolutely perfect. Thank you Langdon Tactical for all you do! I have since ordered and installed a 2nd TJIAB for my 92X Centurion because of the excellent results of the first one!!
-
Amazing
I ran my M9 stock with a 14# hammer spring the first 5000 rounds. Recently decided to get a TJIB along with a steel trigger. DA went from just over 8lb and gritty to 6lb 10oz and smooth as silk. By far some of the best money to spend on a Beretta.
Related Products
-
-
-
Out of stock
-
Reviews
-
TJIB
Absolutely amazing. I’m transitioning from striker fired handguns back to da/sa after watching Mr. Langdons videos and after watching Mickey at carry trainer and this kit is a must . Thank you
-
92 series TJIB
I have an LTT 92 that was ordered with Ernest's trigger work and decided to order the kit with the optimized trigger bar to drop into my Wilson Centurion. I can't tell the difference in pull weight & smoothness which says alot for the value for these kits. While I wasn't unhappy with the Wilson trigger bar reset in the Centurion, the new LTT Optimized trigger bar was very noticeable upgrade in comparison.
-
Trigger Job in Bag
Fantastic, in my quest to return to metal guns with hammers. I needed to do something about my 92 compacts rough trigger. The trigger job in a bag was perfect easy install, though trigger return spring and my fat fingers did have a brief anxious moment. The final result is a very smooth DA and appropriate SA trigger. If you like the 92 this is a fantastic upgrade I went with the 13 pound hammer spring, in my mind about the best compromise.
-
Beretta trigger job in a bag
This was well worth every penny and highly recommended for anyone wanting to make their Beretta feel like a completely different sidearm. I had no experience disassembling a Beretta M9/92 and this took me about 30-40 minutes after watching Ernest Langdon's video. I went with the Langdon trigger bar and a 12# hammer spring in my kit and I had no light strikes in 500+ rounds with the majority being S+B which is known for harder primers than U.S. ammo. I ended up with about 6.5# DA and about 3.5# SA and the reset is very short I would say even a tiny bit shorter than my Sig Legion P226. Buy this without hesitation this is the simplest project to install that yields amazing results. For reference my installation was done on a 92X Full Size that came with D spring from factory.
-
Trigger Job In A Bag with 14# Mainspring & optimized trigger bar
I installed this in a NP3ed 92G Centurion. The video directions were excellent, the results in the pistol were incredible, with about a 6# DA pull, and a really short reset. I went with a 14# hammer spring in an effort to get better ignition when I have a .22 practice kit fitted. A 12# hammer spring has given me 100% ignition with 9mm.
-
TJIAB NP3
100% satisfied! Installed in about 15min following the youtube video instructions. Dropped right in and now I have a smooth DA pull and a SA that goes off when I "think" about pulling the trigger. Smooth. Its my first Elite LTT with a TJIAB so I am not sure how much the NP3 helps. I assumed LTT offers it b/c it makes a difference. Will be ordering another soon for my M9A1.
-
Love the short reset!
I decided to do the whole kit instead of just the trigger bar and elite hammer. It was a drop-in fit to my M9A3 and made the already good trigger even lighter & crisper with a 14lb hammer spring. The stock reset was too long for my preference and the optimized trigger bar solved that.
-
Trigger Job in a Bag
Recently purchased an Elite LTT at my local gun store. I had some questions about the TJIAB and sent LTT a message. They responded very quickly and answered my question. I then purchased their TJIAB and watching Ernest's installation video, installed in my new Elite LTT. This pistol is top of the line and the craftsmanship they put into each component of the trigger job was absolutely perfect. Thank you Langdon Tactical for all you do! I have since ordered and installed a 2nd TJIAB for my 92X Centurion because of the excellent results of the first one!!
-
Amazing
I ran my M9 stock with a 14# hammer spring the first 5000 rounds. Recently decided to get a TJIB along with a steel trigger. DA went from just over 8lb and gritty to 6lb 10oz and smooth as silk. By far some of the best money to spend on a Beretta.