LASD 92 Elite LTT Red Dot Ready Slide

(No reviews yet) Write a Review
Adding to cart… The item has been added

LASD 92 Elite LTT Red Dot Ready Slide

You must use your LASD County Email and Contact information in order for this order to be finalized. 

RDO Slides are Currently Out of Stock Due to Lack of Supply from Beretta - Expected Back in Stock Q3 2024 - You can still send your 92 Slide in for RDO cut here: RDO Slide Cut

Our Red Dot Ready slides are "plug and play" - simply install your optic, add your existing barrel & recoil assembly, and attach the slide to your existing frame. 

All Elite LTT Red Dot Ready Slides are cerakoted black and ship with the footprint pattern adapter plate you selected already installed and ready to accept your optic upon arrival. The RDO slides are 'G-model'/decock ONLY and available in both full size & compact. Plate to slide screws: Plate to slide screw: M3- 0.5mm x 6mm, Holosun to Plate Screw: 4 x 40 5/16 (non-metric), RMR To Plate Screw: 4 x 40 3/8 (non-metric) - The LTT RDO Solution for the Beretta 92 Series of pistols is currently Patent Pending. 

FULL SIZE RDO SLIDES - Estimated delivery on all slides is 7-14 days.

Compatibility Specifications: 
Our slides will work on any 92 FS (9mm) and later model pistol including Beretta's M9A4 and 92X RDO, WC Brigadier Tactical, M9 and M9A1s - the only known exceptions that are not compatible are the 92A1 and 92S pistol frames (see last image for compatibility chart). Compact & Centurion owners order Compact slide; Full Size owners order Full Size Slide - Compact slides will fit Compact and Centurion frame pistols only!

This slide kit does NOT ship with a red dot optic OR a barrel/recoil assembly, if you are looking for a full slide build, please add these products to your order: 

If you have an older gun, we recommend replacing your barrel assembly, or at the very least your locking block

Q: What is the cowitness of the RDO BUIS?

A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.

Q: What red dot optics are supported by the LTT RDO Solution?

Our RMR Plate fits:

  • Trijicon RMR
  • Trijicon SRO
  • Trijicon RMR HD
  • Holosun HS407C
  • Holosun HS507C
  • Holosun HS508T
  • Riton X3 Tactix PRD
  • NcStar VISM FlipDot Pro
  • Swampfox Kingslayer
  • DOES NOT FIT RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
  • RMR to Plate Screws: Holosun to the RDO Plate use:  4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – 3/8

Our Docter Plate fits:

  • Docter/Noblex Sight C
  • Docter/Noblex sight 2+
  • Docter/Noblex sight III
  • Docter/Noblex QUICKsight 5.0 VR
  • Noblex Sight G
  • Vortex Venom
  • Burris Fastfire 2*
  • Burris Fastfire 3*
  • Delta Optical MiniDot*
  • Delta Optical MiniDot II*
  • Hawke Reflex 1×25*
  • Sightmark Mini Shot Pro Spec*
  • Sightmark Mini Shot M-Spec
  • Leica Tempus
  • MAKdot 1×25
  • Vomz Pilad 1×20
  • Docter Optic to Plate Screws: 4x40 - 3/8 or 4x40 - 5/16 

Our Sig Romeo/Delta Plate fits (no built-in rear sight):

  • Leupold Delta Point Pro
  • Sig Sauer Romeo 2
  • Delta/Romeo Optic to Plate Screws: 4x40 - 1/2

Our HE509T Plate fits:

  • Holosun HE509T 

Our Holosun EPS Plate fits:

  • Holosun EPS
  • Holosun EPS Carry
  • Holosun 407k
  • Holosun 507k
  • Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight. 
  • EPS Optic to Plate Screws: 4x40 - 5/16


Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.

Some customers have reported the the Jagerworks SRO Shroud will fit on our system, however we have not confirmed this. Customers using this or other shrouds that add height between the adapter plate and the optic should be aware that they MAY or MAY NOT need longer/taller screws to get full thread interface - LTT does not carry longer screws.  

For more information on RDO Mounting Footprints, please click this link: Optics Info 

DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.

Still have questions? Check our Frequently Asked Questions (FAQ) page for more information, including which optics fit the RMR Footprint. 

Videos Hide Videos Show Videos