custom HK build alpha
My first HK and couldn’t be happier!!! Sent off brand new for the RDO cut, cerakote, and trigger job. Team LTT made sure things were exactly as I wanted them!!!
IMPORTANT! DOWNLOAD CUSTOM GUN WORK FORM HERE:
LTT's Low RDO Solution for your HK P30 Custom Gun Work package includes all of the following:
- Slide milling, and prep for our proprietary RDO plate as well as cerakote on the slide in Elite Black.
- Our proprietary optic plate (See footprint options below)
- Red dot height BUIS front sight that matches the adaptor plate built in rear sight (lower 1/3rd cowitness)
- Return shipping to the same address the slide was shipped from.
Our RDO customization will only work on the HK P30, P30L, and P30SK
The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. Torque Spec: 12 inch pounds.
**An RDO/Optic sight is NOT INCLUDED in this package**
To send your slide in for the LTT RDO Cut for the HK P30 series Slides, please follow these steps:
- Add this item to your cart and check out like any other product.
- Fill out the Custom Gun Work form and include your order number (five digit number you receive at checkout).
- Pack your slide for shipping and include the filled out CGW form. Your slide MUST BE CLEANED or you will be charged a $15 cleaning fee.
- Ship the slide (signature required) & documents to the address provided on the CGW form.
- LTT will notify you when we are returning the slide - Please be sure to keep an eye on your tracking number for delivery to and from LTT. The shipping fee is for RETURN of the slide to you.
Please allow 4-10 weeks for all work to be performed from time of receipt. If you want to verify that it arrives to LTT, please ship signature required to the address on the order form and follow your Tracking Number. Return Shipping is a fixed rate will be charged when you place your order. You are responsible for inbound shipping and following all processes listed on this form.
What red dot optics are supported by the LTT RDO Solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Trijicon RMR HD
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- DOES NOT FIT RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
- RMR to Plate Screws: Holosun to the RDO Plate use: 4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our HE509T Plate fits:
- Holosun HE509T
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Holosun 407k
- Holosun 507k
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- EPS Optic to Plate Screws: 4x40 - 5/16
WHAT IS THE LTT REAR SIGHT FORWARD (RSF) OPTIC PLATE?
LTT is proud to offer a limited selection of our optics footprints in a rear sight forward (RSF) configuration. Having the rear sight in front of the optic window decreases visual clutter, making it easier to remain focused on the target during the shooting process. Placing the rear sight forward of the optic also means that you can see the dot in 100% of the window, because none of your view of the optic is obstructed by the rear sight. Finally, the RSF configuration can help keep the front lens of your optic clean by deflecting some of the carbon, gas, and debris that exits the chamber away from the lens.
The following footprints are available in a rear sight forward configuration:
- ACRO
- RMR
- 509T
- EPS
Q: What red dot optics work with the Rear Sight Forward RDO plates?
Our ACRO Plate fits:
- Aimpoint ACRO P1
- Aimpoint ACRO P2
- Steiner MPS
WE HAVE NOT CONFIRMED FITMENT WITH ANY OTHER ACRO-FOOTPRINT OPTICS.
Our RMR Plate fits:
- Trijicon RMR
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Holosun 507 Comp
- Riton X3 Tactix PRD
- Swampfox Kingslayer
DOES NOT FIT:
- Trijicon SRO
- Trijicon RMR HD
- RMRcc
- Trijicon RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
RMR to Plate Screws: Holosun to the RDO Plate use: 4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – ⅜
Our HE509T Plate fits:
- Holosun HE509T
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Holosun 407k
- Holosun 507k
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
EPS Optic to Plate Screws: 4x40 - 5/16
Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.
Looking for replacement screws? You can find them here.
LTT cannot accept or work on firearms that have already received third party customization or gunsmithing to the integral parts of the firearm’s action.
This includes but is not limited to the trigger and fire control mechanism, the barrel, firing pin, or any safety components, or slides previously cut for red dot by another vendor. If you are unsure about the status of your firearm, please call us to confirm.
-
-
Solid. Very cool.
Plate is solidly installed, the cut is clean as a whistle and the cerakote is evenly applied and very sharp looking, even if it does make the serial number difficult to read. Already put 9 magazine through it with zero signs of looseness. Must-have option for the p30L.
-
P30 slide cut
Turn around time was as listed and well done. Has a nice finish on the slide that is easier to clean and gives it a smooth option. Makes the gun look professional and amazing.
-
P30L milling
Absolutely rock solid. A must for any HK p30 series pistol. I've put a stupid number of rounds through my pistol both before and after the midification. No ragrats except the finish that came back on my slide was a glossy finish (?????) When it SHOULD mimic the original finish, which is matte. Function is 10/10, but holy cow, Langdon, use the magpul matte black finish for goodness snake, holy heck.
- FAQ:
- Custom Gun Work FAQ
- Warranty Info:
- Click Here To Read Our Warranty & Return/Exchange Policy
