LTT RDO Slide Cut
Excellent workmanship. I had by LTT Elite Centurion slide cut, put the SRO on it, and I can't put it down. This customization is the handgun bargain of 2020 at $352.....and for us Beretta guys we have been blessed.
This Custom Gun Work package includes all of the following:
- A full top end rebuild to replace all of your stock components with our patented replacement components, including new decock levers.
- All 92 RDO slides are G-model decocker only; if you send in an F-model (safety) slide, it will be converted to G-model decocker as part of this package.
- Slide milling, and prep for our proprietary RDO plate as well as cerakote on the slide in Elite Black or whatever color it comes in as. IE: M9A3 FDE slides, will be coated in FDE.
- Our proprietary optic plate (See footprint options below)
- Red dot height front sight that matches the adaptor plate built in rear sight
- Return shipping to the same address the slide was shipped from
- The LTT RDO Solution for the Beretta 92 Series of pistols is patented in the US as of May 2023.
The LTT RDO solution is now compatible with all 92 Slides listed in the options set above (92 Elite LTT, M9A3, Brigadier, Brigadier Tactical, 92D, 92FS, 92XI, 92X Performance, 92GTS, 92A1/96A1, M9A4).
An RDO/Optic sight is NOT INCLUDED in this package, you can add one here.
To send your slide in for the LTT RDO Cut Rebuild Package, please follow these steps:
- Add this item to your cart and check out like any other product.
- Fill out the Custom Gun Work form and include your order number (five digit number you receive at checkout).
- Pack your slide for shipping and include the filled out CGW form. Your slide MUST BE CLEANED or you will be charged a $15 cleaning fee.
- Ship the slide (signature required) & documents to the address provided on the CGW form.
- LTT will notify you when we are returning the slide - Please be sure to keep an eye on your tracking number for delivery to and from LTT.
**Cerakote Slides: If you send in your slide with camo or an intricate pattern, we will NOT apply matching cerakote to the slide cut because we cannot match the pattern. We will match the existing slide base color cerakote to the slide cut. All other slide-cut guns will be sent to the customer with cerakote.
**NP3 SLIDES: If you are sending us a slide with NP3 levers, please add the Product Add On Fee to your cart - this covers the difference between the included black levers and new NP3 Levers. New amended levers are necessary for this system**
LTT cannot accept or work on firearms that have already received third party customization or gunsmithing to the integral parts of the firearm’s action.
This includes but is not limited to the trigger and fire control mechanism, the barrel, firing pin, or any safety components, or slides previously cut for red dot by another vendor. If you are unsure about the status of your firearm, please call us to confirm.
Please allow 4-8 weeks for all work to be performed from time of receipt. If you want to verify that it arrives to LTT, please ship signature required to the address on the order form. Return Shipping is a fixed rate will be charged when you place your order. You are responsible for inbound shipping and following all processes listed on the CGW form.
What red dot optics are supported by the LTT RDO Solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Trijicon RMR HD
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- DOES NOT FIT RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
- RMR to Plate Screws: Holosun to the RDO Plate use: 4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our Docter Plate fits:
- Docter/Noblex Sight C
- Docter/Noblex sight 2+
- Docter/Noblex sight III
- Docter/Noblex QUICKsight 5.0 VR
- Noblex Sight G
- Vortex Venom
- Burris Fastfire 2*
- Burris Fastfire 3*
- Delta Optical MiniDot*
- Delta Optical MiniDot II*
- Hawke Reflex 1×25*
- Sightmark Mini Shot Pro Spec*
- Sightmark Mini Shot M-Spec
- Leica Tempus
- MAKdot 1×25
- Vomz Pilad 1×20
- Docter Optic to Plate Screws: 4x40 - 3/8 or 4x40 - 5/16
- NOT AVAILABLE FOR BERETTA RDO SOLUTION (M9A4, 92X RDO, 92XI, 92X Performance, etc)
Our Sig Romeo/Delta Plate fits (no built-in rear sight):
- Leupold Delta Point Pro
- Sig Sauer Romeo 2
- Delta/Romeo Optic to Plate Screws: 4x40 - 1/2
- Sig Romeo X will not work on our plates
- NOT AVAILABLE FOR BERETTA RDO SOLUTION (M9A4, 92X RDO, 92XI, 92X Performance, etc)
Our HE509T Plate fits:
- Holosun HE509T
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Holosun 407k
- Holosun 507k
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- EPS Optic to Plate Screws: 4x40 - 5/16
WHAT IS THE LTT REAR SIGHT FORWARD (RSF) OPTIC PLATE?
LTT is proud to offer a limited selection of our optics footprints in a rear sight forward (RSF) configuration. Having the rear sight in front of the optic window decreases visual clutter, making it easier to remain focused on the target during the shooting process. Placing the rear sight forward of the optic also means that you can see the dot in 100% of the window, because none of your view of the optic is obstructed by the rear sight. Finally, the RSF configuration can help keep the front lens of your optic clean by deflecting some of the carbon, gas, and debris that exits the chamber away from the lens.
The following footprints are available in a rear sight forward configuration:
- ACRO
- RMR
- 509T
- EPS
Q: What red dot optics work with the Rear Sight Forward RDO plates?
Our ACRO Plate fits:
- Aimpoint ACRO P1
- Aimpoint ACRO P2
- Steiner MPS
WE HAVE NOT CONFIRMED FITMENT WITH ANY OTHER ACRO-FOOTPRINT OPTICS.
Our RMR Plate fits:
- Trijicon RMR
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Holosun 507 Comp
- Riton X3 Tactix PRD
- Swampfox Kingslayer
DOES NOT FIT:
- Trijicon SRO
- Trijicon RMR HD
- RMRcc
- Trijicon RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
RMR to Plate Screws: Holosun to the RDO Plate use: 4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – ⅜
Our HE509T Plate fits:
- Holosun HE509T
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Holosun 407k
- Holosun 507k
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
EPS Optic to Plate Screws: 4x40 - 5/16
Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.
Looking for replacement screws? You can find them here.
NOTE: These plates will not fit on the Beretta M9A4 or 92X RDO solutions AS IT COMES from Beretta. These will only work with LTT’s proprietary RDO solution.
For more information on RDO Mounting Footprints, please click this link: Optics Info
- FAQ:
- Custom Gun Work FAQ
- Warranty Info:
- Click Here To Read Our Warranty & Return/Exchange Policy
-
-
RDO optic cut
I sent my 92x slide in and received back within the specified 4 weeks. The workmanship is great and definitely well done and thought out. I appreciate they sent all my parts back to me. I setup my rmr and through 300 rounds it has been fantastic. It sits very low and the sight picture is great. I can’t speak to longevity yet but I anticipate it’ll last due to the design principles. Overall a great product so far and would recommend. I’ve had many optic mounts and it’s one of the best designs.
-
Optic cut
The craftsmanship that is exhibited in this finished product from LTT is superb. The instruction video was very helpful and showed what to do/not to do when mounting the optic. The cerakote job was better than what was on it when it was sent in, that was appreciated. Team, you have once again knocked it out of the park with this offering!!
-
Just awesome
I love this
-
Slide cut for rdo optic
LTT did a awesome job on my slide.
-
RMR Slide machining and modification parts installation
This is the one of the best if not the best value going based on the quality and volume of work, the parts provided and the turnaround time. Everything was completed exceptionally well and done within the time specified. Thank you LTT team!
-
Optic cut for 92
100% satisfied. Looks great and sight fits great.
-
M9A3 RDO Cut
I got my M9A3 slide back and I could not be happier with how it turned out. The mounting platform is extremely rigid and it mounts impressively low on the slide. Mounted my Holosun 507C-V2 on it. I have no complaints about the service itself. That being said, some things that I saw may be a slight inconvenience but is by no means a deal breaker. 1) For the M9A3 slide specifically, that slight upswept angle of the safety levers will go back to the traditional right angle due to the design of the modified levers and safety mechanism to make it work with the cut. 2) I wish we could have different front sight options. I think something like the Ameriglo sights with a bright orange front or a fiber optic would be really neat compared to the completely blacked out front. That's all I have to say really about it. It is an awesome upgrade for your slide and I cannot recommend it enough.
-
LTT RDO Elite Optic Cut for 92 Slide
Received my slide back from LTT. Top Notch! Excellent work. Optic actually mounts lower than most optic-ready striker fire slides. And, it is ROCK SOLID. Thanks LTT, this is a game changer for 92 fans!
