Beretta Match Hammer

Beretta Match Hammer

The Beretta Match Hammer is a DLC coated gunsmith-fit replacement for your existing 92 or PX4 hammer.

This upgrade reduces pre-travel in single action to less than 2MM of travel - combined with our Optimized Performance Trigger Bar, your single action pull & reset will be short, smooth, and fast!

The Match Hammer MUST be used with either the LTT Optimized Performance Trigger Bar OR the Beretta Extreme S Trigger Bar AND the Match Hammer MUST also be installed either by LTT or another qualified gunsmith. 

When combined with the LTT Trigger Job, the Beretta Match Hammer may cause your single action trigger pull weight to be lower than the standard 3.5# pull weight. 

LTT accepts no liability for any damage or injury that results from failure to follow the above instructions. 

Please Note: The Beretta Match Hammer will ship in Beretta Factory packaging with a SKU tag that reads "Skeletonized Hammer 92" with part number C5L047 - we assure you this IS the Match Hammer, and a part number search on Beretta's website will confirm this: https://www.berettausa.com/en-us/skeletonized-hammer-92-92x-perf/c5l047/ 

DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent gunsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturer's warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.