Crazy good
This product is amazing! The 7lb DA pull is smooth as butter with a short crisp break at 4lbs on the SA pull. The most impressive part is the insane short reset. The trigger resets shorter than my 1911s! Buy this kit!
After several thousand trigger jobs on Beretta 92s and PX4s, Langdon Tactical Technology offers the "Trigger Job in a Bag." We polish and hand-stone all of the components that are part of the firing mechanism to smooth and lighten your trigger pull in DA/SA. The Trigger Job in a Bag is about 80% of what we do when we don't have the actual firearms. You can also do a full NP3 upgrade to your pistol that includes a "Trigger Job," with this kit.
PLEASE NOTE:
This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith.
This kit is NOT compatible with the 92X Performance or 92XI; these pistols must be sent in for custom gun work.
No returns will be accepted on opened kits.
92, 96 and M9 Series Trigger Job in a Bag includes:
- Trigger Bar
- Hammer, Sear
- Sear Spring
- Trigger Spring
- Hammer Strut
- Reduced Power Hammer Spring
To make a purchase, please select one option from each group:
Finish: this is the finish and color of the metal parts in the Trigger Job in a Bag.
- Black (factory)
- NP3 (nickel teflon/stainless color)
Hammer Option:
Trigger Bar:
Hammer Spring Weight:
With the following hammer springs, your DA/SA pull weight will be approximately
- 12# DA: 5.6 to 6.4lbs
- 13# DA: 6.3 to 7lbs
- 14# DA: 7 to 7.5lbs
- Single Action for all: 3.5 - 4lbs
LEAD TIMES:
Black: In stock - Shipping in 3-5 Business Days
NP3: In Stock- Shipping in 3-5 Business Days
Common Customer Confusion:
Customer: I already have these parts, so I don't need everything in this kit.
Answer: Yes, you do need this entire kit. The parts you have have not been worked on. Yes, the parts started the same, but we do work on the individual parts in the kit for 80% of what we can do if we have the gun itself.
Don't see the options you're looking for? Join the waitlist to be notified as soon as they're available!
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
- FAQ:
- TJIB FAQ
- Warranty Info:
- Click Here To Read Our Warranty & Return/Exchange Policy
-
-
Trigger job in a bag
I have a Langdon 92 one of absolute favorite pistols installed this kit it took off a pound or more from double and single action 7.5 and 3.5 no creep in trigger and reset is as impressive as the trigger pull my kit had the 13lb spring
-
TJIAB
I am so happy I purchased this product! I just took delivery a week ago of my new 92g LTT Elite and while the stock trigger wasn’t too bad what the upgraded TJIAB did was make it awesome! This is my first Beretta so I was little apprehensive about doing the install myself but the video Earnest Langdon did made it very straight forward. The un shoots awesome! DA pull is about 6-1/2 and SA just over 3 Couldn’t be happier! Great product! Great company! A++++
-
92FS TJIB
I have always loved the 92. It is an iconic pistol. All the great heros in the movies when I was growing up used it. Mel Gibson in Leathal Weapon, Bruce Willis in Die Hard etc. I carried an M9 as a side arm in the US Army. That's when I learned the standard trigger was terrible. Love the gun, hate the trigger. I was gifted a 92FS Stainless a year or so ago. I did some research and found Langdon Tactical. The videos made it sound amazing. I was at my local gun shop and they had a LTT 92 in the case. It had this trigger kit already installed. I picked it up and immediately knew this was the real deal. I ordered the kit from the parking lot. It arrived a few days later. I watched the how to video on YouTube twice. Setup at the kitchen table and 20mins later it was done. Very easy install. Super happy with the purchase. I have been showing/telling all my friends. You can not go wrong with this if you own a 92. Awesome product. Thank you, LTT.
-
Trigger Job in a Bag - 92/96/M9 Series
Installation was quick and easy. The product is everything you have heard. Nice smooth DA pull, SA is nice and light with a crisp let off. I have put several hundred rounds through it since installing the kit, I suck so much less now. I'm stuck in a very restrictive state for firearms, so due to the limited options and familiarity with the M9 I went with the 92FS. I was a ho-hum about the purchase, I now LOVE this pistol.
-
Game Changer
I bought Beretta 92FS Inox when I turned 21 because that’s what I knew from when I was in the army. Now that I’ve had more experience with other firearms I realized anything the army gives you is made by the lowest bidder. I wanted to take my beretta to the 21st century of triggers and bought the kit. I was able to install it myself but it took hours, several different instructional videos, and plenty of headache. If you’ve ever assembled an AR from scratch you should be fine but not something I’d recommend to someone who hasn’t ever dealt with detent springs. Once I had everything set the frustration was worth it because it felt like I had a completely different pistol. The double action is as smooth as butter and the single action and reset are perfectly crisp. I’d recommend this to anyone with a stock beretta.
-
trigger job in a bag
Fantastic. easy to install, great service and fast shipping, too. Finally will get my 92fs out for some trigger time and maybe competition, too! So glad I found you. TY
-
Great if you're new to working on guns
Bought the kit with the Wilson trigger bar as the description (under stand-alone trigger bar) sounded like it would require more fitment to my individual pistol compared to the LTT version, which I prefer. Parts are well polished but are set up for a drop-in fit for most firearms, meaning that some material (we’re talking thousandths here) have already been polished down. In my particular firearm, while the result was smooth and crisp, I did not achieve quite as much hammer arc as I have in the past with individual untreated components. All that being said, if you are looking for drop-in parts with an excellent result, you cannot go wrong here. Kit provides a very smooth trigger pull and crisp break. If you prefer to tailor parts to your pistol’s individual tolerances for maximum benefit, then you might prefer to get untreated trigger bar and fit/polish all components yourself.
-
Works great
Fast shipping, made a noticable difference on da
Related Products
-
-
-
Out of stock
-
