The LTT RDO Solution for your Beretta 92
This Custom Gun Work package includes all of the following:
- A full top end rebuild to replace all of your stock components with our patented replacement components, including new levers. All 92 RDO slides are decock only.
- Slide milling, and prep for our proprietary RDO plate as well as cerakote on the slide in Elite Black or whatever color it comes in as. IE: M9A3 FDE slides, will be coated in FDE.
- Our proprietary optic plate (See footprint options below)
- Red dot height front sight that matches the adaptor plate built in rear sight
- Return shipping to the same address the slide was shipped from
- The LTT RDO Solution for the Beretta 92 Series of pistols is currently Patent Pending.
Our RDO customization will only work on the 92 Elite LTT, 92X, M9A3, 92A1/96A1 as the machining is set-up for proper deck height and sights on these models ONLY (please see the last image for compatibility chart).
This means it will work on the 96A1 and 96 Vertec Slides.The RDO will not work on the Wilson Brigadier Slide, but it will work on the Wilson Centurion Tactical.
The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds.
**An RDO/Optic sight is NOT INCLUDED in this package**
To send your slide in for the LTT RDO Cut Rebuild Package, please follow these steps:
- Add this item to your cart and check out like any other product.
- Fill out the Custom Gun Work form and include your order number (five digit number you receive at checkout).
- Pack your slide for shipping and include the filled out CGW form. Your slide MUST BE CLEANED or you will be charged a $15 cleaning fee.
- Ship the slide (signature required) & documents to the address provided on the CGW form.
- LTT will notify you when we are returning the slide - Please be sure to keep an eye on your tracking number for delivery to and from LTT.
***NP3 SLIDES: If you are sending us a slide with NP3 levers, please add the Product Add On Fee to your cart - this covers the difference between the included black levers and new NP3 Levers. New amended levers are necessary for this system**
LTT cannot accept or work on firearms that have already received third party customization or gunsmithing to the integral parts of the firearm’s action.
This includes but is not limited to the trigger and fire control mechanism, the barrel, firing pin, or any safety components, or slides previously cut for red dot by another vendor. If you are unsure about the status of your firearm, please call us to confirm.
Please allow 4-10 weeks for all work to be performed from time of receipt. If you want to verify that it arrives to LTT, please ship signature required to the address on the order form. Return Shipping is a fixed rate will be charged when you place your order. You are responsible for inbound shipping and following all processes listed on this form.
CHECK OUT THE NEW LTT GEAR HERE including RDO IWB holsters, T-shirts and RDO hat!
Frequently Asked Questions regarding the RDO Cut for 92 Series Pistols:
Q: Is the LTT RDO Solution the same as the Beretta RDO Solution?
A: No; Our solutions are very different in design and functionality, and are not compatible with one another: Our plate will not fit the Beretta RDO slide, nor will their plate fit our slides.
Q: What is the cowitness of the RDO BUIS?
A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.
Q: Can you do the RDO on my M9A4/92X RDO/Other Beretta RDO 92 Model?
A: No; Due to the positioning of the Beretta slide cuts, we are not able to offer our RDO solution on the Beretta RDO slides at this time.
Q: Can you do the RDO on my 92/92 FS slide?
A: No; The top of the 92/96FS slide is slightly taller than the Vertec slide. The CNC program and the adaptor plate is only set up for the specific height of the Vertec/Elite LTT/M9A3/92A1 slide.
Q: Can you do the RDO cut on my Brigadier Slide?
A: No; The top of the Brigadier slide is slightly lower than the top of the Vertec slide. The CNC program and the adaptor plate is only set up for the specific height of the Vertec/Elite LTT/M9A3/92A1 slide.
Q: Can you do the RDO Cut to my 92/96 D, 92/96 D Vertec, 92X Performance, 92/96 Combat, 92/96 Stock?
A: No; These models do not use a slide-mounted safety lever and therefore have a different firing pin. We do not make a firing pin that works with these model pistols.
Q: What red dot optics are supported by the LTT RDO Solution?
Our RMR Plate fits:
- Trijicon RMR
- Trijicon SRO
- Holosun HS407C
- Holosun HS507C
- Holosun HS508T
- Riton X3 Tactix PRD
- NcStar VISM FlipDot Pro
- Swampfox Kingslayer
- DOES NOT FIT RMRcc
- RMR to Plate Screws:
- For attaching a Holosun to the RDO Plate use: 4x40 – 5/16
- For attaching an RMR or SRO to the RDO Plate use: 4x40 – 3/8
Our Doctor Plate fits:
- Docter/Noblex Sight C
- Docter/Noblex sight 2+
- Docter/Noblex sight III
- Docter/Noblex QUICKsight 5.0 VR
- Noblex Sight G
- Vortex Venom
- Burris Fastfire 2*
- Burris Fastfire 3*
- Delta Optical MiniDot*
- Delta Optical MiniDot II*
- Hawke Reflex 1×25*
- Sightmark Mini Shot Pro Spec*
- Sightmark Mini Shot M-Spec
- Leica Tempus
- MAKdot 1×25
- Vomz Pilad 1×20
- Doctor Optic to Plate Screws:
- Doctor to RDO Plate use: 4x40 - 3/8 or 4x40 - 5/16
Our Shield/Delta Plate fits (no rear sight):
- Leupold Delta Point Pro
- Sig Sauer Romeo 2
- Delta/Shield/Romeo Optic to Plate Screws:
- Delta/Romeo: Delta/Romeo to RDO Plate use: 4x40 - 1/2
Our HE509T Plate fits:
- Holosun HE509T
- HE509T Optic to Plate Screws:
- Holosun 509T: Holosun to the RDO Plate use: 4x40 – 5/16
Our Holosun EPS Plate fits:
- Holosun EPS
- Holosun EPS Carry
- Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight.
- Warning: This plate will not fit the 407/507K optics. While the manufacturer lists the footprint as the same, the mounting post has a different height on the EPS optic and a slight difference in the size of the optic body.
- EPS Optic to Plate Screws:
- EPS: EPS to RDO plate use: 4x40 - 5/16
Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.
For more information on RDO Mounting Footprints, please click this link: Optics Info
See the videos page for videos from the range, shop, drop test and drop test after thoughts.
Still have questions? Check our Frequently Asked Questions (FAQ) page for more information!
Videos Hide Videos Show Videos
37 Reviews Hide Reviews Reviews
-
LTT RDO for M9A4
WOW!!! Finish is better than factory! If you are on the fence - get off and get it done. Amazing quality of work and detail.
-
Best of the best
Had the optic and trigger job done on my 92A1 and I couldnāt be happier with what I had sent back to me. Mounted a HS507c and didnāt have to adjust anything, sight cowitnessed with dot right out of the box at 7 yards. Definitely my new favorite pistol!
-
Best of the best
Had the optic and trigger job done on my 92A1 and I couldnāt be happier with what I had sent back to me. Mounted a HS507c and didnāt have to adjust anything, sight cowitnessed with dot right out of the box at 7 yards. Definitely my new favorite pistol!
-
Custom work LTT RDO Optic cut
Overall I am very well pleased with the work and the attention to detail. I am blown away on how well it looks and met my expectations. I am however unhappy with how there is no front slide serrations and that is one of the main things I was looking forward to. I assumed that they would have added this feature, since it was in the pictures. But It could have also have been on my part for not noting that I wanted front slide serrations when placing my order. O well.
But overall very well pleased and would definitely buy from in the future. Thank you again landon tactical! -
Amazing work
Recently sent my LTT 92 elite centurion slide in for the RDO cut, with the NP3 add on so it matched the rest of the pistol. The work was so well done I couldnāt easily tell it was my slide from a brand new one.
A frustrating few weeks has since passed waiting to get the trijicon SRO I wanted at a reasonable price. That happened yesterday, so today was range day!
Fitting the optic to the mount was a breeze following ELās video tutorial.
Adding the SRO has made an already superb firearm, truly exceptional. It also means I can now shoot both eyes open and not need vision correcting glasses to shoot and get a decent sight picture. Iāve recently entered those years when focusing on the front iron sight has become difficult.
I popped a MantisX on the rail, and am now looking forward to getting lots of practice in, so I can do justice to this piece of engineering art. -
Satisfied!!!!!
I sent Langdon Tactical my M9A3 slide for the RDO Optic Cut and I could not be happier with the attention to detail and craftsmanship put into the finished product. I mounted a Holosun 508T on it and I am getting reps in as often as possible. This is my dream build and I hope to pass this one on to my son one day. Thanks LTT!!!