Super Duty Shotgun Sight

LTT Super Duty Shotgun Sight

The Super Duty Shotgun Sight replaces the factory front sight and protective wings on your Beretta 1301 Tactical shotgun with a serrated steel post. The Super Duty design obscures less of the target and reduces clutter in your optic window. It is wide to make fast shots at close distances easy, but is notched on the top of the post to provide a refined aiming point for slugs.

The Super Duty Shotgun Sight is compatible with all 1301 rear sights, including the factory LPA sight, the GG&G 1301 Optics Mount, and the LTT Fastback Optic Mount. Yes, it works on all 1301 Tactical's. No, it is not compatible with the A300. 

Includes:

Super Duty Front Sight, Molded Insert, Screw, Mil-Spec Nylok Nut, T25 Torx driver

Installed Weight: 0.5 oz

Installation Video: Watch Here

Installation Instructions:

1. First, remove the factory front sight with a thin 5.5mm wrench
2. Install the nut into the insert so that the domed Nylok portion of the nut is visible.
   1. Note: The Nylok is a threadlocker. Loctite is not necessary on this assembly.
3. Install the insert into the front sight base
4. Place the front sight onto the front sight base
5. Install the screw and tighten to 25 in/lbs
   
   1. Note that the screw may leave fine thread marks inside of your front sight base hole. This is intentional and allows the assembly to be more robust.
   2. Once tightened, there may be a slight gap below the insert because it is being pulled firmly up against the top of the front sight base. That is normal and will not affect function.

DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.