LTT PX4 Red Dot Optic Plates

LTT PX4 Red Dot Optic Plates

Please confirm your optic's footprint PRIOR to placing your order, as we cannot accept ANY returns on RDO plates. 

For the LTT RDO Solution for Beretta PX4, we currently have options for the RMR/SRO, the Doctor Optic/Noblex family of optics, the Holosun 509T, the Delta Point Pro, EPS. When you purchase a plate, the mounting screws as listed below are included. 

NOTE: These plates will not fit on the Beretta PX4 RDO solution AS IT COMES from Beretta. These will only work with LTT’s proprietary RDO solution. Our plates will not work in conjunction with ANY other adapter plates.

Looking for replacement screws? You can find them here.

Our RMR Plate fits:

• Trijicon RMR
• Trijicon SRO
• Trijicon RMR HD
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
• Riton X3 Tactix PRD
• NcStar VISM FlipDot Pro
• Swampfox Kingslayer
• DOES NOT FIT RMRcc
• DOES NOT FIT RCR (Trijicon's proprietary capstan screws will not work with our t-nut inserts)
• RMR to Plate Screws: Holosun to the RDO Plate use:  4x40 – 5/16 and the RMR or SRO to the RDO Plate use: 4x40 – 3/8

Our Docter Plate fits:

• Docter/Noblex Sight C
• Docter/Noblex sight 2+
• Docter/Noblex sight III
• Docter/Noblex QUICKsight 5.0 VR
• Noblex Sight G
• Vortex Venom
• Burris Fastfire 2*
• Burris Fastfire 3*
• Delta Optical MiniDot*
• Delta Optical MiniDot II*
• Hawke Reflex 1×25*
• Sightmark Mini Shot Pro Spec*
• Sightmark Mini Shot M-Spec
• Leica Tempus
• MAKdot 1×25
• Vomz Pilad 1×20
• Docter Optic to Plate Screws: 4x40 - 3/8 or 4x40 - 5/16 

Our Delta Point Pro Plate fits (no built-in rear sight):

• Leupold Delta Point Pro
• Sig Sauer Romeo 2
• Delta/Romeo Optic to Plate Screws: 4x40 - 1/2
• Sig Romeo X will not work on our plates

Our HE509T Plate fits:

• Holosun HE509T 

Note: Our 509T Plate will not fit the 509 ACSS

Our Holosun EPS Plate fits:

• Holosun EPS
• Holosun EPS Carry
• Holosun 407k
• Holosun 507k
• Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight. 
• EPS Optic to Plate Screws: 4x40 - 5/16

LTT is proud to offer a limited selection of our optics footprints in a rear sight forward (RSF) configuration. Having the rear sight in front of the optic window decreases visual clutter, making it easier to remain focused on the target during the shooting process. Placing the rear sight forward of the optic also means that you can see the dot in 100% of the window, because none of your view of the optic is obstructed by the rear sight. Finally, the RSF configuration can help keep the front lens of your optic clean by deflecting some of the carbon, gas, and debris that exits the chamber away from the lens.

The following footprints are available in a rear sight forward configuration:

1. ACRO
2. RMR
3. 509T
4. EPS

Important Note Regarding RDO Plate Compatibility: This is not a comprehensive list of all the optics that may work with our plates. Our plates have been designed to fit tightly with the optic body of the main optic it was designed for. Other optics manufacturers may use the same footprint for mounting but have a different size optic body or may change the size of their optic body without warning. We cannot guarantee fit with all manufacturers that use these listed footprints.

Some customers have reported the Jagerwerks SRO Shroud will fit on our system, however we have not confirmed this. Customers using this or other shrouds that add height between the adapter plate and the optic should be aware that they MAY or MAY NOT need longer/taller screws to get full thread interface - LTT does not carry longer screws.  

For more information on RDO Mounting Footprints, please click this link: Optics Info

DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.