G Model Levers and low profile Slide Stop (left side only)
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
I love the low pro slide catch though the right side delete button already fell out and I gone. I very much wish that the low pro safety wasn't decocker only. I like having the option of a safety. Also can you make the low slide catch available by itself? I had to buy a part that I won't use to get it.
This level has much better feel than the sharp ones that come standard. But I feel it should come with a new roll pin to install. Even if you charge a little more you shouldn't reuse the old one. Also the roll pin is very tight making the decocker one hard to install the pin and two making it stick until it loosens itself up.
Much better then the sharp wings of the f type decocker. But this needs to come with a new roll pin. They should not be reused and the one I have was bent removing. Evening if you need to charge a little more to get it. They are also hard to find which one you need.
I found the stock safeties on the Px4 to be way too sharp and hurt my hand when pulling back the slide. So I decided to order these lower profile safeties. Installation was easy, just looked up a YouTube tutorial and grabbed a 1/16 roll pin punch (the one with the little nub at the tip) and a plastic bench block. Don’t use a regular pin puncher or you’ll mess up the roll pin. I had it installed in 10 minutes. While it is a bit more difficult to decock, by no means is it like super-duper impossible hard to decock. And it no longer hurts my hand to rack the slide back, so I say that’s an acceptable trade off. If you can’t stand the stock safety levers, this is a must have upgrade.
these levers make a night and day difference in the handling of my pistol. do not hesitate to install this upgrade.
I was concerned that these wouldn't be functional enough, but if you turn the gun sideways and use both lever sides to decock with thumb and index finger like you rack a 92 from the front from underneath, it's a breeze to use them and then you can ditch the serrated original ones as the smooth stealth levers have sufficient grip when used together. Order the offered side plug as well when using the stealth slide lock as the plug isn't included in this kit. Train hard!
Be aware, the low profile decockers may be a bit harder to actuate while maintaining grip with your trigger hand. That doesn't surprise me with the less prominent shape, and is part of the tradeoff. I'd say I have medium sized hands and will likely manipulate the decocker with my off hand. The slide catch has approximately half the surface area of the full size/standard version and is easy to actuate. Installation was easy enough provided you have punches for a roll pin, and there are plenty of YouTube videos to go over the process.
Stealth leavers worked great for my G model px4 compact. I will note that the Low profile slide catch is not for the ambidextrous model as it just comes with the catch for the left side of the gun. so I couldn't use it. Overall 5 stars
Great product easy to install and fast shipping from Langdon Tactical!
