The new PX4 Carry Lever Set designed by Ernest Langdon and manufactured by Beretta. It's the manufactured version of the original Fugly. The PX4 Carry is a G Model that will work on the PX4 Compact, PX4 Full-size and subcompact.
Only Available As A Set
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
These are the perfect levers for this gun. Big enough to manipulate with your thumb, but small enough to still be out of the way for concealment. You absolutely need these. My only question is about the spring that comes in the bag with the levers. I'm not sure what that is for. I used the video from Mrgunsngear on youtube to learn out to remove and reinstall the parts, but I just use all of the original springs when I put it back together. Did I do something wrong?
The quality is top notch and the installation was easy enough. I have these on my full size langdon carry PX4 now as I don't carry the fullsize IWB and like the extra purchase on the levers. Now I just need an excuse to buy a subcompact to put the stealth levers on, haha.
Excellent product, should be factory standard.
These levers are a major improvement over the Stealth Levers. Your thumb will thank you!
I’ve used the stealth levers and the 92 style levers on my PX4 compact carry. The new carry lever is the best by far. They are easier to manipulate compared to the stealth lever and much lower profile compared to the 92 style. The carry lever is the best of both worlds. I was able to install them myself in about 10 minutes. Just take your time and don’t force anything. Also, you don’t need to take out the extractor like one popular video shows.
Perfect part for an EDC PX4. I liked the thinness of the stealth levers, but had to use my thumb and index finger of my left hand over the top to decock the pistol. There’s no real noticeable difference with the size of these, but there is just enough material there to use my right thumb to decock effortlessly. Highly recommended upgrade. Works perfect leaving the stealth lever on the right side. Easy install with the correct tools.
The stealth levers that came with my PX4 from LTT were very good and I could operate the de-cock fairly easily - unless my hands were really sweaty or I was wearing gloves. The Fugly lever solved this problem. Everyone who has tried it really likes it.
When using the PX4 Carry for 3 Gun shooting the stealth levers are just too small. The Fugly lever is perfect from a size, form and function perspective and work effortlessly when having to de-cock the pistol at the start or during stages. It is still sized narrow enough to not hinder when used for concealed carry purposes. I did not think that any upgrades would be necessary when I purchased the top of the line PX4 Carry but this is a must, specially when you use the pistol for more than just concealed carry purposes and even then I would still recommend it. Perfect.
Without a doubt this lever is the best option for concealment and positive manipulation of the decocking lever. Funny name, but actually looks really good on the pistol.
These are the perfect levers for this gun. Big enough to manipulate with your thumb, but small enough to still be out of the way for concealment. You absolutely need these. My only question is about the spring that comes in the bag with the levers. I'm not sure what that is for. I used the video from Mrgunsngear on youtube to learn out to remove and reinstall the parts, but I just use all of the original springs when I put it back together. Did I do something wrong?
The quality is top notch and the installation was easy enough. I have these on my full size langdon carry PX4 now as I don't carry the fullsize IWB and like the extra purchase on the levers. Now I just need an excuse to buy a subcompact to put the stealth levers on, haha.
Excellent product, should be factory standard.
These levers are a major improvement over the Stealth Levers. Your thumb will thank you!
I’ve used the stealth levers and the 92 style levers on my PX4 compact carry. The new carry lever is the best by far. They are easier to manipulate compared to the stealth lever and much lower profile compared to the 92 style. The carry lever is the best of both worlds. I was able to install them myself in about 10 minutes. Just take your time and don’t force anything. Also, you don’t need to take out the extractor like one popular video shows.
Perfect part for an EDC PX4. I liked the thinness of the stealth levers, but had to use my thumb and index finger of my left hand over the top to decock the pistol. There’s no real noticeable difference with the size of these, but there is just enough material there to use my right thumb to decock effortlessly. Highly recommended upgrade. Works perfect leaving the stealth lever on the right side. Easy install with the correct tools.
The stealth levers that came with my PX4 from LTT were very good and I could operate the de-cock fairly easily - unless my hands were really sweaty or I was wearing gloves. The Fugly lever solved this problem. Everyone who has tried it really likes it.
When using the PX4 Carry for 3 Gun shooting the stealth levers are just too small. The Fugly lever is perfect from a size, form and function perspective and work effortlessly when having to de-cock the pistol at the start or during stages. It is still sized narrow enough to not hinder when used for concealed carry purposes. I did not think that any upgrades would be necessary when I purchased the top of the line PX4 Carry but this is a must, specially when you use the pistol for more than just concealed carry purposes and even then I would still recommend it. Perfect.
Without a doubt this lever is the best option for concealment and positive manipulation of the decocking lever. Funny name, but actually looks really good on the pistol.
