LTT NP3 Upgrade Kit & Trigger Job in a Bag
Upgrade your Beretta 92 like never before with the Langdon Tactical NP3 Upgrade Kit. This kit is comprised of all-new parts that have been NP3 coated, and includes our signature LTT trigger job.
NP3 coating is Teflon enriched to have as little as half the friction of nickel boron and ten times the corrosion resistance. The NP3 Upgrade Kit contains the busiest parts in an operating firearm. Action, trigger pull, and magazine insertion/release will be smoother and longer lasting thanks to reduced friction. Because little-to-no dirt-trapping oil is needed on these self-lubricating surfaces, reliability is also enhanced.
PLEASE NOTE: This kit MAY require some fitting for proper install and function - please watch the install guide video on the "Videos" tab of this page prior to purchase - we recommend that this kit be installed by a competent gunsmith. No returns will be accepted on opened kits.
This kit is not full compatible with RDO components. Some components do not fit.
The NP3 Upgrade Kit includes the following:
- G Conversion Kit
- Solid Guide Rod (Wilson Combat Fluted for Full-Size guns)
- Steel Trigger
- Optimized Performance Trigger Bar
- Oversized Mag Button
- Elite II Hammer
- Locking Block
- US Lanyard Loop Pin
- Plus several other metal internal parts.
Take your Beretta 92 to the next level by either sending your pistol in for the upgrade or purchase the kit (LTT Trigger Job-enhanced parts included) for installation by a competent gunsmith near you -we include a 92 schematic with the parts that are included as well.
This kit will work on almost any 92 Compact, Centurion, or Full-Size gun, including the 92X Series guns, 92 Elite Series, M9, M9A1, M9A3, 92FS. (It will convert it to a G model) If you have a single stack gun, the trigger bar will not work (Compact Type M).
The NP3 takedown lever, takedown button, and guide rod included in this kit will not work on the 92A1/96A1.
Looking for NP3 Magazines? Purchase individual NP3 mags here: Mec-Gar 18rd or Mec-Gar 15rd Compact
Please Note: This kit only includes the parts highlighted in blue on the schematic in the images. It does not include the Wilson Combat Mag Guide or the Stainless Steel Grip Screws.
Shipping times right now: 3-6 Weeks
DISCLAIMER: We recommend that this product as well as all other firearms parts & kits sold by Langdon Tactical be installed by a competent pistolsmith. No liability is expressed or implied for ANY damage or injury which may result from improper installation or use of this product. Installation of any firearm parts may limit or void the manufacturers warranty. We strongly recommend that the safety and operation of your modified handgun be thoroughly checked by an accredited gunsmith prior to use.
Videos Hide Videos Show Videos
11 Reviews Hide Reviews Reviews
Great except missing one part!
Just had my gunsmith install the parts kit. I went with the 12# spring and elite hammer, and I am extremely impressed! The "lubricity" as they call it is amazing, feels like a whole new gun after the install. The only reason I have for 4 stars is I was missing part #4b from the kit, but I reached out to LT to see if they could ship a replacement, past that this kit was stellar and I would definitely reorder. If you are considering this kit I highly recommend it!
Half of the parts are useless without a punch
Aside from the fact that I had to contact customer service three times and had to wait nearly 6 weeks to receive this item, I was equally disappointed when I started to install the parts. Without a punch you’re stuck with a half-done gun. Don’t waste your time buying this and just get the tricked out gun and go through an FFL. I will definitely not be buying from Langdon Tactical in the future as this was a crummy experience. I wanted to support a smaller business that seemed innovative. My review is two stars instead of one solely because of the fact that there is a video that gives you enough aid to install the gun pets without consulting more than 3 other videos.
RESPONSE FROM LANGDON TACTICAL:
Austin, this kit has a delivery time of 4-6 weeks. In a market where demand is high and we continued to advise you that the NP3 process takes 3-4 weeks by itself and that it would be a true 4-6 week delivery time, your decision to NOT want to believe what is stated as a delivery time is sad. Additionally, completely disassembling a gun takes work and parts. Your frustration on a 'small company' that continued to keep you informed seem a little unfair, but we are all entitled to our own opinions. We hope all of the future businesses you buy from are as informative and responsive to your many questions! Thanks! - LTT
Super rad kit. Glad I bit the bullet and ponied up the cash for it
Installed the upgrade kit myself, very fun experience. I have an M9A3 and I transferred the initial trigger job that came with the LTT compact. I then took the NP3/Trigger Job kit purchased and installed it on the LTT compact. NP3 finish looks/feels great, The only thing that prevented me from giving this item 5 stars is the fact that the NP3 magazine guide (which is showing clearly in the picture for this review) was not included. The description did not lay out each individual part and therefore I assumed was included (the images show the magazine guide). The kit is already worth the price of a gun, so I had to spend an additional $70 on the Wilson magazine guide. I recommend specifically laying out what is included in this kit so there is no confusion as to what you are getting. Other than that, the parts work flawlessly and it is what you'd expect from a company of this caliber.
Install LTT NP3 Upgrade Kit & Trigger Job in a Bag + 92 Elite LTT Full-Size Barrel
I had a 2012 Beretta M9 that was un-fired that I wanted to upgrade. I chose LTT over Wilson, really a hard decision, because they gave me a good kit that replaced all parts I wanted. Also I did not want to refinish the barrel, frame or slide of the pistol. I sent my pistol to LTT to have them install the parts. Shipping alone was half the cost of shipping to Wilson, another positive. I used LTT's shipping rates to take advantage of their rates so they sent me a FedEx shipping label to send the pistol to them. I also purchased the 92 Elite LTT Full-Size Barrel, since it was already crowned, therefore I did not have to have my barrel cut and crowned and refinished. I had them install the NP3 parts kit and new stainless barrel to make sure all fit and functioned well. I am extremely pleased with the results. Trigger pull is extremely smooth and trigger reset is very short. Better than any of my Sig's that have had the trigger worked on. I highly recommend this trigger kit and the installation by LTT. The barrel also adds to the esthetics of the pistol. All parts that were removed and the original barrel were sent back in a plastic bag along with the pistol. Good job LTT and thanks!!!